Search results

  1. J

    Need help locating plug

    I have searched and searched but cannot find the c112 plug on my 1996 cobra. The car suddenly would not start the other day when it was hot outside. Turn the key, get chimes and lights, but no click or anything else. I was able to push start it to get home. I have done the following: I...
  2. J

    Does anyone make a 3" x-pipe to stock manifolds

    I wish upr made a 3" x-pipe. I'm sick of long tubes bottoming out. They aren't worth the trouble for 10-20rwhp. At least, not to me, anymore. I've been searching for a couple weeks with no success. I don't want to have to pay $400 for a mac 3" pro chamber and then have to buy a dr gas x...
  3. J

    shift points

    I've been reading for a while and cannot seem to find what I'm looking for. I just recently picked up a 96 Cobra for a DD while I'm rebuilding the engine for my 04. The car from what I can tell has a bbk, 62mm tb, gutted out stock h-pipe, dynomax mufflers with stock tail pipes, a densicharger...
  4. J

    Short Block

    What happened to the short block section of your guys website for 03/04 Cobras? Do you guys not offer anything for them any longer due to their age? Also, I was looking for a link to Boss 330 direct but am not having very good luck. Did something happen?
  5. J

    Best cop car ever!

    Motorcycle vs. Car Drift Battle 2 - YouTube
  6. J

    03/04 Drag Coefficient and frontal area

    I've been searching for some time now and I've found tons of conflicting numbers. I've seen where someone here posted .32 out of the Iron Fist Lead Foot book but I've skimmed back through mine twice now today and damn if I can find it. I've seen .33 for the Cobra R which should have more drag...
  7. J

    Feeler 03/04 Cobra front seats

    These are charcoal. They are are in good shape. Please make offer. Drivers seat Pax
  8. J

    Svt lol

    Haha, I rolled up on a clean white LS1 Z28 sporting 315's and black grand sport fender stripes last night that had SVT LOL in stickers on the back bumper. I couldn't resist the bait. I expected him to take the hit since I pulled up on him and revved it. He down shifted but didn't go. So I...
  9. J

    FS: Diablo Mafia F7373 for

    *SOLD* I used this to tune my 04. It was only on the car three weeks and it worked perfectly when it was removed. $80.00 shipped. DiabloSport :: Gas and Diesel Tuning Systems
  10. J

    FS: Full set of stock uncut springs.

    Just like the title says. I bought them on here so I could cut them and then sell mine off of the car. I ended up getting a great deal on some H&R's on here so I no longer need them. The price is $50.00 + $24.00 shipping anywhere in the continental US. That is exactly what I paid for them. I...
  11. J

    FS: Brand new Kenne Bell BAP upgrad wiring

    *SOLD* This upgrade kit is still in the wrapping as it arrived from Lethal. I ended up going a different route. Price is $30.00 shipped or $25.00 local. Lethal Performance FPDM/BAP Wiring Upgrade Kit [LP-BAPREWIRE] : Lethal Performance, Performance parts for Ford Mustangs
  12. J

    UPR O/R X-pipe for 99-04 Cobra

    *SOLD* This mid pipe has maybe 5k miles on it. It is in perfect working shape. It is aluminized steel. $90.00 shipped $65.00 for a local pick up. Please do not try to negotiate the price down. It isn't worth the time and hassle for me to ship it at anything less than what I'm asking. Trade...
  13. J

    FS: brand new BMR drive shaft safety loop

    Comes with all hardware as it did from Lethal. It was never installed. Price is $55.00 shipped anywhere in the continental U.S. Please don't try to negotiate me down. If you don't think it's a good deal; don't respond. It isn't worth the hassle of shipping for me to sell it for any less. Trade...
  14. J

    Someone with a stock clutch quadrant and adjuster please help.

    Ok there is a huge debate on how a clutch should be adjusted properly. Even clutch companies vary. About 70% of folks say the TOB shouldn't contact the pressure plate fingers while the other 30% of folks argue that the TOB should be in slight contact with the pressure plate. Both sides make...
  15. J

    Kenne Bell helped slay a Lambo Murcielago LP640

    Well, someone in the area has recently gotten a very good looking Lamborghini Murcielago LP640. I've seen him twice in two weeks. Well today I was fortunate to be able to pull up next to him. I hopped at him a couple of times at 50mph in second gear. He looked over at me and smiled. Then all of...
  16. J

    Need help...guys with triple hats please.

    Guys with triple hats please help me find a good location to mount my 3>1 y-block. I mounted it on the r/h side of the tunnel last night above the factory abs and fuel lines. I thought I had room but the stand offs I used to get it to clear the lines and be able to bolt up to the curved tunnel...
  17. J

    Brand new in the box Magnafuel fuel pressure regulator with boost reference

    *Sold* The model is 9950B. Here is a link to Magnafuels website. EFI Regulators My indecisiveness is your gain. I paid $269.00+ shipping for this. $165.00 shipped anywhere in the continental 48 states.
  18. J

    High Lift 4V billet cam cores.

    I bought them to get custom cams ground for my 03 but I ended up getting a deal on a set of Crower cams I couldn't pass up. Price is $265firm shipped. *Trade Pending*
  19. J

    True Forged Icey Res. Similar to Killer chiller

    I bought this from True Forged some time ago and never installed it. I broke the motor before I had a chance to use it. I am no longer going to use it. It is a super nice piece. It works the same as a Killer Chiller by plumbing air conditioning into the intercooler system but is larger capacity...
  20. J

    First time to track with the Cobra

    This is old now but it was the first time I raced my Cobra. It was 94 degrees or something and the DA was a little over 3300ft. I was pretty disappointed with how the car performed. It had a hard time spinnng the 28" tires. The track techs weren't putting any water down. I know there have been a...
  21. J

    So frustrated

    Well, I've been trying to pull the lower pulley off and it is absolutely kicking my but. First, I didn't have a 14mm allen socket. No big deal, drive around and couldn't find one close. Went to Sears 30 minutes away only to find out they didn't sell one individually. I had to buy a set that...
  22. J

    Dumb question about clutch

    A little over a year ago I replaced the clutch with a McCleod RXT twin disc clutch. After I broke the clutch in; I took the car to the track with some 28" hoosier slicks. It seems like I remember the car having a difficult time spinning the tires in the burn out box. The car didn't rev up...
  23. J

    2010 ZR1 got Owned!

    By me on a 2005 Yamaha R1. While it isn't really impressive since the bike is a 9 sec bike stock and the ZR1 is a high 10 sec car stock. However,the senario does make it somewhat humorous. I'm sure some of you will enjoy it while others will flame me, make excuses for the vette, tell me I'm...
  24. J

    D'Agostino Racing...

    Edited by Admin :: View the linked thread below before placing any orders with D'Agostino Racing - D'agostino Racing Shoppers Beware!!! Well, the title doesn't really reveal what kind of thread this is. However, I'm pleased to say that NO ONE can go wrong with D'Agostino Racing when looking...
  25. J

    WTB FORE Walbro triple hat.

    In need of a FORE triple hat set up for Walbro GSS342.

Top