Search results

Circle D converter new in the box and never used. The specs are HP series stage 1 10" 2A converter with a 3200 stall. This converter would be great for naturally aspirated cars. Will fit 4R70W model transmissions. Was originally going to go in a 02 Mustang GT but the car has been sold. Asking...

Pair of 275/35/18 nitto nt05 with 200 miles on the front of the car. Pair of 305/35/18 mickey Thompson et street 2. One is basically bald the other has a decent amount of life left on it. Confident they can make a few passes at the track. Pickup in Abingdon Maryland. $350 for everything...

Pair of 275/35/18 nitto nt05 with 200 miles. $300 Pair of 305/35/18 mickey Thompson et street 2. One is basically bald the other has a decent amount of life left on it. $150 Local deals preferred but may decide to ship. Located In bel air MD.

I went auto and had this left over from my car which just sold. Looking to get $70 TYD.

I bought this for my car and it was on the engine for less then 1,000 miles. Its in prefect shape, does not come with a crank bolt. $85 shipped. http://www.jegs.com/i/March+Performance/655/1158/10002/-1

I have a set of staggered RK's in plasma finish but the one rear 18x10 is peeling just like most of them end up doing. I have them all plastidipped now but sold the car and the owner did not want them. There is no rash on any of the wheels. The front tires are almost brand new Nitto NT05 in...

Here is a link to the sale thread. Just wanted to get the word to the local guys. http://www.svtperformance.com/forums/showthread.php?1032464-Parting-Out-Low-Mile-10th-Anniversary-Cobra-with-Th400-swap-hellion-turbo-BBS-Rks

The entire car is SOLD..... I apologize to those who have asked about parts etc as this was not my intention but the offer is fair enough for me to save the car from the scrapyard yet be financially good enough for me to not part it out. I have decided to part the car out due to the engine...

Parting the car out and these were just shipped back to me last month. They are brand new with the flow sheet from FIC. Looking for $350 shipped.

I am looking to sell my 2003 Silver Metallic 10th Anniversary Cobra. The car has 25,780 miles on it and has just about everything possible done to the car. Last year the built motor it had in it let go and I spent a ton of money putting a built Teksid in the car. It has been running for about...

Anyone have a lead on one? Prefer it to be 30k miles on less just because the car only has 25k. Need to to be in perfect shape so I can throw it in and go. Looking to buy ASAP. Thanks.

Looking to put a set of these on my turbo cobra because I need a 28" tire. They will be going on my 18x10 BBS RKs and I have a solid rear. Mainly seeing how fitment is and how you like them. I know a few guys who have been 9s on the M&H so I know they have the ability to hook. Unfortunately...

These were on my car for about 600 miles. I pulled the t56 and replaced it with a th400 so I had to get ARP flex plate bolts instead. $25 shipped

I have a set of almost new tires that I pulled off my 10th Anniversary Cobra Wheels. The buyer did not need the tires. They have roughly 1,000 easy miles on them since I only used them for 500 miles which was breaking in my new engine. The guy I bought them off of had them on his fox body...

FS: OEM 10th Anniversary 03 Cobra Wheels. They have almost brand new Continental Extreme Contact DWS tires on them 255/40/17 all the way around. Wheels are in excellent shape except on the very outside lip their is minor clear coat peeling from having the tires mounted. Located in Harford County...

Well after wanting to go auto for a while and dealing with t56 troubles I finally pulled it and sold it. I already have a complete TH400 swap lined up that I will be picking up on sunday. I'll update this as much as I can along the way. Anybody with an auto car have a preference on shifter...

Going to a th400 and sold the t56 so this is what's leftover. The buyer is putting the trans in a fox so this stuff wasn't needed. Driveshaft- $200 Bellhousing- $60 Located in northern Maryland and prefer pickup of the driveshaft.

I just pulled my T56 from my 03 Cobra which was rebuilt 600 miles ago by Revolution Automotive. It had a brand new cluster gear and the two bearings associated with that replaced and also a brand new Tremec 26 Spline input shaft and associated bearing/races replaced. The trans looked perfect...

I am going auto so I cannot use the crossover pipe that comes with the kit. Its in perfect condition and has been heat wrapped with DEI exhaust wrap. They sell these at hellion for $187+shipping so ill ask $100+shipping. I will trade for the auto specific one sold by Hellion. Located in Harford...

I just pulled my T56 from my 03 Cobra which was rebuilt 600 miles ago by Revolution Automotive. It had a brand new cluster gear and the two bearings associated with that replaced and also a brand new Tremec 26 Spline input shaft and associated bearing/races replaced. The trans looked perfect...

I just upgraded to a nicer daily and have a white 94 Accord Coupe 5spd for sale. Its nothing pretty by any means but it will get you where you need to go. I put a new interstate battery in it last year along with a new axle and alternator. Just last week I replaced the clutch master and slave...

Just wanted to ask what you guys are seeing at idle oil pressure wise after you've beat on the car for a little bit? Cant seem to find it in a search. Im just trying to pick the correct weight oil for my application and am thinking about going with a 15w-40.

Long story short i popped my 8.5 compression motor back in october and it made 700/760 on 20psi. The new motor that Im currently breaking in is 10:1. How much boost would I need to run to make roughly the same power as before? I was thinking 16psi should do it but Im not real familiar with the...

Looking to get $45 shipped plus PayPal fees. Took it off to replace it with an eboost street for more features.

Well I have been waiting for almost 5 months to get this motor back from the builder to make a thread and here it is. Short background was I bought the car last February with a built motor......Stock block, diamond pistons(stock comp), stock rods, stock crank, ARP throughout. Car made 701/763 on...