Up for sale is my stand alone fuel system I put together for my 2012 GT , this was ran with a NX plate kit , I made 2 Dyno pulls and roughly 6-2nd thru 4th gear pull races and it worked flawlessly , I pulled everything off my car to sell it 2 months ago and I sold the car and I'm just getting...
Complete N/X plate kit with all hardware that came with the kit , I am adding a micro switch along with the wot box and a cold fusion bottle warmer , there's some extra various AN fittings I'm including as well to plumb in a purge solenoid , also I'll throw in some wiring and connectors and some...
For sale is a 26,600 mile Kona blue premium gt with the brembo brake package , factory 3.73 gears , sport line lowering springs with adjustable pan hard bar and camber bolts , also has lower control arm relocation brackets , Barton shifter with single post bracket , stainless braided clutch line...
I have a N/X plate kit for sale that has every piece except for the bottle and bottle brackets , I bought it of someone on svt and the bottle was lost in the mail , I was accused of scamming him even though I've been on here for years and have a perfect trader rating , I have decided to go...
Like the title says I want to purchase a boss manifold , preferably ported but I'm interested in any boss mani for sale , I have PayPal ready and am serious about buying immediately , check my seller/buyer rep I'm legit. Email [email protected] , text to 6one4-three6four-five9five2
WTT used factory 3.73 for 3.55
I have a used factory 3.73 gear I'd like to trade for a 3.55 , the gear is in the car still and didn't make a noise , car has 23,000 miles on it and is up on jack stands because I just put a spec stage 3+ in the car for the N/X nitrous kit I'm installing , I'll be...
I have a used factory 3.73 gear I'd like to trade for a 3.55 , the gear is in the car still and didn't make a noise , car has 23,000 miles on it and is up on jack stands because I just put a spec stage 3+ in the car for the N/X nitrous kit I'm installing , I'll be running a 150 shot and I have a...
I'm listing this for a close friend , everything is legit , the contact numbers are below if you need any additional info or pictures , thanks !
This is a beautiful Grabber Orange mustang GT with a Shelby front end. The car has about 23k miles and has been garage kept, never driven in bad...
Ok how do I find out why the wrench light is on and how do I get it off ????? Did 87 KAM relearns and changed my tunes back and forth !!!! I had a speaker installed and had a minor wiring issue but was resolved and car runs great and idles perfect , feels great under wot .....but the stupid...
Ok mods are boss intake, Jlt cai, lethal performance off road h-pipe (no-cats) flow master axle back and e85 , car is a 2012 m6 car tuned by Shawn at AED , the first graph is back to back pulls with above mods , second graph is from a 50 dry shot (35 jet) the window switch kept messing up...
I have a frpp pro-cal tuner and k&n panel filter that came with the tuner for computer code ZXDO , this tuner will only work for this computer code , it will be the 4 digit code on your PCM under the hood . I have all paper work receipts and original box . I decided to void my warranty and went...
just wondered what was needed to install a boss intake on my 2012 gt, i know the $11 kit from late model resto takes care of the vapor purge valve , and jlt says their cai will bolt right up , they say its tight because of the downward angle but they say it works or you can buy a 3inch coupling...
hey guys i have a procal tuner that i dont need anymore, went with a lund tune and will never need the procal again, i loaded my stock tune back on the car from the procal and i was wondering if i could sell it and someone else can use it or is it married to my car only ? and if so is there...
my 2012 5.0 has been running real strong with only a few mods but ive been edged out a couple times lately by a car length or less and wondered what direction i can go to close that gap because i wanna stay N/a for now, my mods right now are lethal performance off road h-pipe, flowmaster axle...
Here's my 2012 with eibach sportlines , bmr lca relocation brackets , adj. panhard , also installed a boss/cs front air dam . The car rides just like everybody said with the brembo package an sportlines , it really suprised me how good the car rides. I noticed almost zero difference from the...
Ok there's tons of info on nos and such but I would like to know how the stop p-zero 19 inch tires do on the street with a 100 shot or less , I know they dead hook now but I only have a procal and axle back , Also I've read about blowers and clutches but how are the stock clutches holding up...
up for sale is a metco lower crank pulley kit for 03-04 cobra , included is a 4lb. lower crank pulley , i do not have pics but theres normal wear and everything is in perfect working order all parts are included to replace the stock lower cage , im asking $310 shipped , if pics are absolutely...
i need a good 96-04 cobra crank , one with no spun bearings and one thats not bent , i know a new replacement is $800 so if you have a nice crank i will pay you what its worth , i have paypal ready , will pay for shipping so no worries about that , please pm me with what you have
Im needing a complete set of valves for 03-04 cobra heads , just need the valves only no locks or retainers just valves , i know many people have done head work and took the factory valves that were in perfect working order out of their heads . Thats what im looking for , i have paypal ready...
I have a built motor with stage 3 cams posi race port long tubes on e85 , im making 570/525 now , I just broke my crank so im pulling the motor and im considering porting my heads , what are the usual gains from something like a MMR stage 3 port , they want $1050 to do the work ,or does somebody...