Hello all,
I have a 2016 GT with 24,000 miles, and I recently got a check engine light (CEL) while driving to work. I pulled the codes (P0300 and P0308), and cleard them since I didn't feel a miss. Two days later, the light was back, so I took it in for assessment. The local dealer changed...
Today's the day. I received the springs yesterday, and I will install them today after work. I will post before and after pictures and describe the ride difference. :lol:
Can someone please get me a ground clearence measurement in the front on a 2016 GT with the Performance Package? I am specifically looking for the lowest point of the bumper and the ground. I am planning to order lowering springs, and I need to see what I am working with. My car hasn't...
Fellas,
I am eagerly awaiting delivery of my Mustang, and taking advantage of the wait time by researching exhaust. I could use your input on brands, and I am really interested on where you found a good deal. As for sound, I am not looking for maxium volume, and I don't like a raspy...
This morning I pulled the trigger and ordered a 2016 GT. The cutoff for ordering a 2016 is today, and I found out that the Guard Metalic color is being discontinued for 2017. Being that California recently went back to the black and yellow license plates, like the ones on Bullitt, I chose...
So with the wife out of town for a few days, I decided to catch up on a couple wish-list items. First, I swapped out the transmission fluid for the Royal Purple Max Gear. All I can say is wow, the difference is huge; it's soooo smooth now.
The second item was the replacement of the door...
I installed my Steeda shifter and JHR bracket today. The installation was easy, with just two areas requiring a little effort. First, the removal of the bracket under the car is a little difficult due to a retainer clip. After removing both nuts, I pulled the driver’s side down and then...
After looking at each of the name brand shifters for a long time, I finally pulled the trigger and ordered the Steeda. I had a Tri-ax on my 03 Cobra, but hated it. In fact, it was only on the car a day before I pulled it out and shot it with a 44 mag. That said, I decided to go with the Steeda...
I finally got around to installing my exhaust, and I am really pleased with the results. I started off with the Heart Throb 3 inch Cat-to-axel system with the H-pipe, and chose Flowmaster’s 40 series for the mufflers. I had a local muffler shop fab up the mufflers rather than buy the axel-back...
I have a first run 03 with 40,000 mile, I just took the car in for a ticking noise, but feel it's a rod bearing rather than the head tick. Is the head tick preasent at idle?? Mine starts at about 1800 RPM and is present throughout the RPM band. Also, if I let off the gas the tick goes away...
Does anyone know of any dealerships in the Texas/Arkansas area that will accept the X-Plan? I have a friend whom I am trying to convert over to Mustangs, he is a big BMW guy, but loves my 03. If anyone can help with a dealership and a pin number please respond.
:beer:
http://ideashappen.msn.com/Entries/Default.aspx?id=7028
I was looking at ideas that people have concerning car care and found this. I think it's really cool, Anyone seen one???
Just wanted to share my experience with Shawn at SOCALDIABLO. I had been piecing together a pulley kit for a couple of months, doing research on the various products and venders available. The final component was down to either a Diablo chip or Predator; I chose the Predator. I had only seen...
Anyone have the TSB # for the lower control arms? Mine are popping, and I remember a post with a TSB listing and control arms were on it. Thanks in advance.
__________________
Does anyone have a part number for autolite or motorcraft spark plugs in a non platinum plug; for pullied cars???
I just put in NGK-TR6's but I have a miss and think one may have fouled. I live in a hick town and had to mail order these. Thanks
I have heard that we want our timing at 23 degrees as apposed to 26. My question is how do you check the timing? At idle or at a particular RPM? I had a custom tune for my Predator form Rick at Amazon and I'm experiencing detonation. I richened up the fuel table to 6.0 %, and retarded the timing...
About a month ago I had # 7, and # 8 coil packs replaced due to a miss that occored while the car was under hard acceleration. Two days ago I started feeling that miss again and took the Cobra to the dealership only to find that # 1, and # 5 are bad now. Anyone else have this problem or have any...
I just installed a 2.81 and Predator with a custom tune from Rick at Amazon. I would like to know what my timing is sitting at before I retard it. The car feels really strong except for a little pinging. I talked to Rick yesterday and he told me to richen it up and take away some timing. The car...
I am putting together a pulley kit, and have already purchased the PREDATOR from Rick at Amazon Racing. I was wanting to play with the Predator to see how it works, so I installed the performance tune tonight. I love the tune, the idle is a little faster and it just felt smoother under...
I started piecing togrther my pulley upgrade earlier this month by purchacing a billet steel Steeda 2.81 pulley. I was so impressed with the quality of their pulley, that I decided to go with a Steeda idler pulley kit as well. Again the quality was second to none. infact the idler pulley was not...
Simple question. I just need to know if there is anything tricky about it. I hate to start on a project and find out I need a special tool. Any thoughts???