Search results

Hello All, Here is a short but sweet run down of my issue. Had this DTC pop up for rich bank 1. Fuel pressure reads 45 psi on regulator before the rails As i looked into the issue i replaced bank 1 fuel injectors (issue stayed) Replaced 02 sensor (stayed the same) Checked for vaccume leaks...

Hell All, I was looking into installing a quick release steering wheel in my car. Just wanted to see what combinations others had and or ideas. Please post your pictures of your setups and part numbers if you have them. thanks!

Hello All, I recently purchased a set of kooks long tubes 1 7/8 to 3 inch collector. Is my only option to use a kooks x pipe? Or has anyone found other ways around this? I would rather not spend almost $500 on a x pipe. Let me know any ideas you may have on options for me to use. Thanks!

I have only been in Indiana for a few years, I need some ideas for finding someone to tune my 03 cobra. I have called brenspeed and they have to much on their plate at the moment. It's a built motor with Cams and a 2.8 pulley on stock blower full fuel system etc. SCT x3 tuner Open to all...

Hello all, I am in the market for another L. Im more interested in a roller or one that is blown up. Please shoot me a PM or text me 314-315-5547. thank you, Brian

As the title says i have a 2001 true blue vert. 94xxx miles title:rebuilt this car is very clean inside and out i can send pictures via email or text im at work i can upload pictures tomorrow. Modifications: sub frame connectors K&N intake Pypes OR X-pipe magnaflow catback 03 cobra rims 10.5...

What is a good convertible top cleaner and or conditioner I'm trying to clean up the top on my (new to me) 01 true blue vert Thank you, Brian

Did the 01 cobra verts come with factory subframe connectors i just bought a 2001 true blue vert :-D and wasnt sure if they came factory or not i know my 98 did not but the guy i got the car from really didnt know to much about it. thanks If anyone can post pictures of the bottom of there...

As the title says i currently just got my first IRS car its an 01 cobra I'm looking to do some work to the IRS what is the most cost effective way to "bullet Proof" it i see bushings and all that stuff but was curious what everyone has done its stock but I'm planning on doing the rear end first...

So I did a cam swap in a 95 Cobra with a 302 I swapped cam push rods lifters springs and rockers but kept the pedistool mount setup instead of doing studs for the rockers the problem is that i got scorpion 1.6 rockers and the valve covers are hiting the rockers in the front and back on the...

Hey guys im looking to pick up a truck because it would be easier for me while im in college I have a 98 cobra with these mods and the car has just over 70,000 miles everything works and runs great it just could probably use some struts. please let me know if you have any questions. Engine...

Can anyone tell me if the left hand side (drivers side) timing gear is supposed to be flush with the cam or not :dw: because my timing gear deff doesnt mount flush and im putting this thing back together and want to make sure it right i can post up pictures if you would like. PLEASE HELP...

Im a serious buyer im looking to have these parts by next weekend or mid next week at the latest shoot me offers please!!! Im looking for a 96-98 timing cover COP valve covers and i would like to pick up some custom or comp stage 3 or 2 cams what ever shoot me offers Thanks, Brian

well i was driving yesterday and I went to switch lanes i was in 5th and i put the pedal to the floor and this was what happend i havent gotten in my car in weeks let alone do i dump the clutch so i honestly have not a single clue how it happend. :??: but here are some picture hahaha enjoy...

well i was driving yesterday and I went to switch lanes i was in 5th and i put the pedal to the floor and this was what happend i havent gotten in my car in weeks let alone do i dump the clutch so i honestly have not a single clue how it happend. :??: but here are some picture hahaha enjoy...

Im planning on getting my D1sc here really soon and im having house of boost finish up my setup seeing as they built the rest of the car . Im just curious as to who has them how much boost and what kind of power they have made. Im planning on running hopefully 18lbs on pump gas but it might be...

Well im looking to do more with my suspension i have H&R SS lowering springs with strange 10 way adjustable shocks and struts and of course caster camber plates in the front but im looking to do upper and lower controll arms in the back what are som setups you guys have done im just curious or...

Well i didnt post up awhile back in january that my vert got totaled but long story short some ass hole was having a bad day so he decided to ride my ass so i switched lanes he whent around me and i guess decided to purposly cut me off ass close as possible and slam on his breaks and i cought...

So i was trying to pass emissions and i dont have IMRC's because i have mach 1 heads and i kept throwing a code for bank 2 being stuck closed and the car didnt have the box attached anymore for imrc's there for i came up with this haha let me know what you think its just a home made simulator...

IM looking for a set of 4 but if you have two shoot me an offer i will pay to ship. Thanks, Brian

1998 BLK COBRA VERT make me an offer PLEASE Well so here is the deal I recently got into an acident cause of someone doing a hit and run and they cought the guy and his insurance totaled out my cobra the air bags were deployed but i hate to see the car just be sent to a junk yard when it runs...

Its a GSXR600 Tinted windsheild Carbon fiber frame sliders GSXR handle bar ends Just had the 7,400 mile matinance(plugs, oil, tranny fluid, air cleaner..All replaced) it has just at 6,xxx miles on it CLEAN TITLE New back tire and new front tire I have a helmet that is optional with...

Anyone like the 99' cobra wheels on the car?? I dont wanna mess up my good wheels nor did i wanna change tires so i put on the winter wheels let me know what you think. Here are the FR500's i took off.

Ok so my buddy has an 01 cobra and its got some sort of a spec clutch in it and i cant really tell but i have adjusted the set nut on it multiple times because the clutch isnt getting full engagement and it keeps going back to the same way it was to the point you can put it in gear is it a...

Im driving a 01 cobra with a intake o/r x pipe long tubes and 4.10's im not planning on doing major mods but i do want to do some tuning with my car so im just wondering what tuner would be the best for me. Thanks, Brian