Search results

Can anyone tell me the differences between Mach 1 motors and 03/04 Cobra motors besides aluminum and iron blocks? Heads, cams, pistons, rods, cranks,? Thinking of doing a poor mans Cobra! Had one, sold it, regret it, now need another! If anyone knows also differences between Lincoln markviii...

I am relisting my ported eaton for sale, after previous buyer backed out at last minute. It is painted with a black textured paint similiar to a bedliner. It has a Reichard Racing 2.65 pulley, new roller bearings, coupler, fresh oil, and two more bottles that come with it. I will sell for $250...

Hey i need some advice guys. I recently ported my own supercharger and drove it with pretty good results for about a 1000 miles then the bearings went out in it, so I bought another eaton local one off a guy that i know the history of. It wasnt pullied or ported. I ported it myself and it was...

$400 plus shipping. Just recently repainted same color and texture as picture. It is a matte black similiar to powdercoat. It holds up to heat well but easily is scratched so be careful installing. Will include rr 2.65 already on blower, stock tb and plenum, two bottles of supercharger oil, and...

Does anybody know which way the pulley faces. I bought one and am not sure which way its supposed to face. It has a flat side and a deep dish side. Most other pulleys have the deep dish side facing you. Just am not sure please help. Thanks!

Just discovered something bad ass on PSE SUPERCHARGERS website. A twin supercharged 900hp lightning great video. That thing was sick. Can you guys imagine a twin supercharged cobra. It looked like 2 whipples. It runs and looks factory you guys gotta check this stuff out.

Like title states i need a 2.76 or 2.8 upper eaton pulley.

I'm thinking of selling my 04 Cobra. Only trades im interested in are lifted trucks, preferably diesel. It has every bolt on you can put on a cobra. It has 44,000 miles, black paint, black interior, chrome saleens, painted valve covers, supercharger, and intake black. The pics showing 2004 were...

Make offers, i probably wont refuse. Everything is sold except stock shifter, stock alternator pulley, stock lower setup, pulley guard, stock throttle body and plenum,led tailight bulbs, ebc redstuff rear brake pads for 93 cobra,and 2" spacers.

Make offers! Everything is off my 04 cobra except the EBC REDSTUFF pads they fit a 93 cobra, they sent me the wrong ones when i swapped my pads and rotors. They are brand new in box. Everything else has about 24,000 miles on it.(stock belt 19000miles gates belt has 3000 miles) The parts list is...

Looking to buy a lower pulley setup. Preferably alternator pulley, lower pulley kit, and belt needed for 2.65 upper:rolling:

coil covers 35 shipped stock sc pulley 25 shipped stock shifter 25 shipped egr bracket with sensors 25 shipped coolant overflow tank 25 shipped brand new in package oem ford 4v valve cover gaskets 40 shipped

would like to buy lower pulley setup. Dont want to pay more than 150. I know somebody wants to go turbo. LOL

I have a set of ebc red stuff pads brand new in box. I ordered a set for my 04 cobra and they sent me the wrong pads. I called and they said they were for a 93 cobra rear. Will take $30 shipped.

Just installed DDM Tuning hids 9007 hi and low beam and H-10 foglights. I have no voltage to my foglight harnesses and my guage cluster shows im in high beam mode. Tried flippin the turn signal still stays in high beam according to little cluster light. I know that when your headlights are in...

Just installed my boost overlay and it only took about 20 minutes. It frees up a spot on those pillar pods for a much needed battery gauge. All terminators should have one, they are accurate and look factory instead of a add on so why not. 100% endorsed on my end! Thanks Mr. Ray Hilton! Now if...

I support this product 100%. It is one of those little details that set your car apart from the rest. It looks factory and its accurate! Thanks Ray! Every cobra owner should have one. It will give those pillar pods an extra slot for something else like a a/f meter or a battery guage that are...

Looking for lower pulley kit for cobra. Would like 6lb or above.

Here are some parts off my 04 cobra. These are stock parts only. supercharger pulley cover 25 shipped supercharger pulley 25 shipped 39# injectors 100 shipped throttle body and plenum 100 shipped coil covers 30 shipped

Selling parts off my 04 Cobra. All parts are factory stock. Pay pal accepted. coil covers $40 shipped radiator overflow tank $45 shipped throttle body and plenum $150 shipped supercharger pulley $25 shipped supercharger shroud $25 shipped 39#injectors $150 shipped

I have a few parts for sale from my 04 Cobra. Best way to reach me is private message me or e-mail at [email protected]. List is as follows. All parts are factory and removed at 43000 miles. I have pay pal! stock blue 39#injectors $150 shipped stock radiator overflow tank $ 45...

Ive got a home port, accufab single blade t/b and plenum, no cats, bassani x, flowmaster 2 chambers, 60# injectors, kb boost-a-pump,sct 3000 maf,dual pass h/e, aftermarket coolant tanks. will a 10# lower kill my blower or does anybody have dyno numbers for this set-up? I can replace bearings in...

I am needing a complete front bumper and interested in aftermarket heat exchangers, reservoirs, coolant tanks, lower pulley setups, 60# injectors, sct mafs preferably b2800. Let me know what u got.

Just wanted to say thanks to Mr. Hilton for a wonderful product. Fast delivery, with easy to understand directions. Thanks alot. If your one of those guys who dont like all the clutter on the inside, then this is a must have. 100% accurate with a factory look. What a genious idea. Hats off to...

I am still trying to sell my 04 cobra. This is second time posting on svtp.Car has 43,000 miles. Pics are all on same day just changed batteries in camera. Mods are as follows: ported eaton supercharger accufab polished single blade tb accufab polished plenum accel coil on plugsx8 ngk...