Search results

So i built this car up specifically to go race it. Been solid last year and this year up til last week. Made a pass and the line blew off the frps. No biggie, put it on and zip tie right? Well the fueling hasnt been right since. Lean on the top at wot and also goofy at idle. Otherwise, car...

Going to keep a spare on hand after this round of bullshit. What do you know about the variety of wideband sensors out there, specifically the 4.9 lsu sensors? I have the AEM 30-4110 with the Bosch sensor # 0258017025. Seems as though there are several different numbers available. I crossed...

33 spline Wavetrac differential for 8.8 Ford. No problems with it, just went with a spool. Ring gear in pic is removed. 750.00, paypal fees and shipping not included.

Got a new build put together last year, finished up dialing it in this spring. Quick details are full weight, 9.5:1 compression, .020 over, KB 2.0 @ 15 psi, custom cams, longtubes, E85, solid axle, 3.55 gears, T56 and a 26 spline.. running QTP Hoosiers trapped a best of 7.15@100mph in the 1/8...

Searched all over the internet for some pictures or a how to for taking apart a snout and replacing bearings. Blower is a 2.0 KB with a snout upgrade.. (confirmed the blower with KB) The only thing I found was an old thread on a Dodge forum. According to that, the shaft should come out the...

Bought these new to use for a cast iron Romeo block. Not the correct ones. I believe they fit aluminum blocks? Opened but did not install. 70.00 shipped to the lower 48. Buyer to cover the fees or send FF. Forgot to mention, they are standard size.

Been researching this vehicle the last couple days and seriously considering replacing the wifes daily with one. Reviews seem really positive and for the money at the SX trim level you get a lot of features. Starts at 44k for the SX package with AWD, add 2k for the Prestige package gets you...

Clean and straight 95 Z28 convertible for sale. 39800 actual miles on this 2 owner car. Always adult owned. Comes with a a treasure trove of original documents including window sticker, build sheet, pre delivery paperwork, dealer jacket from the original sale, dealer literature, and owners...

Back in August I bought a used 1995 Chevrolet Camaro Z28 convertible. It had some mechanical issues that needed to be ironed out and I was up for a project. It's a 2 owner car with low miles, 39 K original miles. What I didn't know was that the original owner kept all the original documents...

So, I recently purchased a nice 95 Z28 convertible from a guy who spent a wad of cash trying to get an overheating condition resolved. So the shop that did the work ran down the gambit of cooling system parts, 2 water pumps, and had the heads off twice. I removed the radiator after I purchased...

So I spent way too much time today searching, reading, watching videos... can't seem to figure this out. I'm trying to get some wifi from the house out to the shop. Have an old Linksys WRT110 router, trying to use it as an access point. Trouble is the existing router is in the opposite end of...

So I should probably just let this go being it's working on 10 years old. But it really didn't get much use for half it's life. Have a Philips 47" that the screen went black. Sometimes you could switch it off then back on and it would come back. Finally gave out some magic smoke and I found...

Brand new, never installed R.H. tail light assembly. With black trim inside found on FX4, Harley, trim levels. Shipped to the lower 48 for 120 .00

So, car runs great, not chasing any gremlins or anything, just dumping oil and filter before I head to the rally this week. Looked up and damn! Have it tore down in this pic and the broken piece turned out by hand luckily. Havent touched the alt since 2010, and never noticed it before. No...

Need someone to help me out with the location of the black spacer used in the stock toe link setup. Did it go top or bottom on the inside joint? Reason I ask is that I made my own setup for toe links with greasable hiems so I made spacers to to get the centerline of the new toe links the same as...

Anyone headed out to this show this weekend? Im south of there for the week just wondering if there is usually a good turn out for qualifying. Might be able to go Fri or Sat.

Wanting to sell these locally. Don't want to hassle with shipping really. Located in Iowa, willing to meet within reasonable distance. Set of bigs and littles. $1300 Fronts are 15x4 w/ 1.625" backspace and 26x7.50 Mickey front tires. Rears are 15x10 w/ 6.50 backspace and 27x11.50...

Just for curiosity, what is the most common breaking point for the half shafts on our cars. I broke a drivers side splined shaft. broke at the outer joint.

http://guardianlv.com/2014/06/tesla-motors-releases-its-patents-to-the-public I don't think we will ever be done with fossil fuels, at least I hope not. But this could be the start of a major movement towards electric vehicles.

Looking for an outer boot and the shaft (only). I have 1 good inner and 1 good outer joints just need the shaft to piece it back together for a spare. Post up or PM what you have, pics helpful. TIA.

Talented J5VGILERzgg

Don't know if anyone posted this long time ago, I've never watched the video but there's an 03/04 redfire convertible in the first part. (04 I think, drivers door lock cylinder is chrome.) Blake got the road rage attitude part right but foreign car?? Casted wrong. /JTT2LEyjdC4

For those like me who haven't seen it, might be old news but did a quick search and didn't see anything: Shelby's outrageous 575-hp Raptor - Video - Personal Finance A blown 6.2L would be fun, but I think I could find my own supercharger and exhaust for less than 18K, which is the upcharge...

Dont know if this has been shared yet on here but saw it for the first time today and thought it was kinda cool. Now I really want it on my cobra. Had a 2014 Mustang dropped today I got to pre-deliver. Upon opening the door there was a "pony" running across the floor. Turns out it's in the...

1/4" wheel spacers 5 on 4.5 $20 shipped/ pp'd. 19" swaged tubes with teflon lined heim joints. Used as toe links for irs, went with bars with greasable ends, $75 shipped/paypal'd.