Search results

Some asshole broke my driver's front window glass so I need to replace it ASAP. I was wondering if anyone knew where I could get one or if someone has one for sale. Thanks guys. I don't want to spend too much as I am going to be selling the car.

Just like the title says I need one of the grommets that seals the spark plug tube part of the valve cover. One of mine came off when I removed the valve cover; not sure if they are available seperately, hopefully someone has some lying around.

Has anyone else noticed that a lot of companies are advertising that they are making more enviromentally safe products or manufacturing processes? It is all great if they are but it seems that most are just using it as another way to advertise and say that they are better than their competition...

Okay I finally got all set up with my 03 engine into my 97. Right now I am running a base tune with a Diablo chip, car still needs to be dyno tuned. I am running a 2.8 pulley, a Densecharger intake, stock injectors & MAF, an Aeromotive FPR set to about 38psi, and I have Aeromotive fuel rails...

Hey guys I just hooked up the intercooler on my car. It is the stock Bosch pump and I have an AFCO HE and Canton battery reservoir. I can hear the pump running and I can feel it running on the hoses connected to it but I can't see the flow in the reservoir. Can you always see the flow in the...

Hey guys I need a passenger side ignition coil bracket for a 96-98 Cobra/GT.

Hey guys I am trying to hook up my boost gauge and my boost reference to my fpr. I was going to use the lowest port on the back of the eaton because that should be manifold vacuum. The problem is that when I hooked up my boost gauge to it I get vacuum but no boost; I tried revving the engine...

Hey guys I want to get a temp gauge for my IC but they are all from 100-250 which sounds kind of high for the IC temp but I don't know what it is supposed to be at. So, yeah I need to know what the temp range is. Thanks.

Hey guys I am finally going to sell my white 97 Roush GT. I have been in the process of installing an 03 cobra drivetrain in it for about a year now and I just don’t have the time to finish the car. The car is 98% complete and I have 99% of the parts already, there are a few minor things that...

Hey guys trying to complete my motor install; got some oil pressure problems. The motor is an 03 that had about 1k on it with no problems other than the head tick. I put a Canton road race pan and SHM billet oil pump gears, other than that the engine is stock on the bottom end. My problem is...

Hey guys I just put the updated head on my 03 cobra engine and after I start the engine there is a tapping noise, sounds like it is coming from the valvetrain. The new head came pre-assembled so all I did is torque it down on the block. I haven't had a chance to get the cooling system in yet...

Just like the title says guys. I have the diagram for 03 GT and Mach 1 but there is nothing on it for the 4V and the wire colors are different for the GT and the cobra so if anyone has a diagram or knows which wire goes where in the ECU I would greatly appreciate it. Thanks in advance.

Hey guys I have an 03 cobra engine in my 97 and need to hook up my boost gauge. I was wondering where would be a good place to hook it up and where I could get a fitting to connect it to the engine. Oh and the gauge I have is an Autometer Phantom gauge with a vacuum line, not electronic...

Hey guys I am in the process of installing my 03 motor in my 97 but there are some vacuum lines and stuff that I am not sure about and it is really hard to get a picture of the rear part of the engine and the throttle body on the net. If someone could post some pics of the rear and driver's...

Hey guys I am in the process of putting my T-56 into my 97 DOHC and it didn't come with any instructions. My problem is that the crossmember doesn't line up with the tranny mount if I install it like it looks like it should go; it sits too far back. D&D told me that I have to drill new holes...

Hey guys does anyone make return fuel rails that fit the 03-04 cobra? I need some that will connect to stock Ford fittings for my 97->03 engine swap.

Okay heres the deal: Some a$$hole stole my Bassani x-pipe with cats out of the shed at work. So I'm out a $400 xpipe and I can't finish my project car until I get one. Now I just want to go cheap and get a stock h; I'll worry about a bassani later. So if anyone has a stock h and wants to...

I need 03-04 Cobra PS lines that go from the hydro boost to the rack and pump, there are three I believe plus a return hose on the bottom of the reservoir. Thanks.

I am in the process of putting an 03 engine in my 97 GT. The powersteering lines of the 97 go right through where the alternator on the 03 engine goes so I need to get 03 lines. I was wondering if anyone knew if the 03 fittings are different on the pump and/or the hydroboost than the ones on...

Hey guys I have a JDM interchangable upper pulley hub but I don't know what size allen bolts to use for it. I tried getting a hold of JDM a while back but never got any help. If someone could measure the thread size for me that would be great. Thanks.

I recently saw a 03 Cobra buildup in a Mustang magazine, not sure which one. They put an aluminum plate with a vacuum fitting on it under the factory supercharger pressure sensor. They said they used it because it is hard to get a boost reference from the supercharger for a boost gauge or for...

I've heard people saying that the 03 Cobra 31 spline diff will fit into a solid axle rear end (with the proper axles of course). Is this true???

Anyone know how much a 2.8 JDM interchangeable pulley costs? I have the hub and all I need is the pulley and the four allen bolts. My friend has one but I don't know how much to offer him for it. I also need the bolts but I don't know what size they are. Any help would be great.

Anyone here use an intercooler temperature gauge? What range do you use?

I know that the '01s have smaller exhaust ports but is it so much different that putting 01 headers on an 03 will be worse than keeping the stock logs? Has anyone done this and have some dyno gains to post?