engine

  1. S

    F/S : New FORD RACING 4.6L ALUMINATOR BLOCK SC M-6010-A46SC

    -- New Aluminator bare block which is no longer produced, the block was purchased as a spare and was stored in my house. I am asking $1200 and prefer local pick up near Cleveland OH. I will ship at buyers expense, crate will be built and weighs around 150lbs. FORD RACING 4.6L ALUMINATOR BLOCK...
  2. S

    F/S : New FORD RACING 4.6L ALUMINATOR BLOCK SC M-6010-A46SC

    -- New Aluminator bare block which is no longer produced, the block was purchased as a spare and was stored in my house. I am asking $1200 and prefer local pick up near Cleveland OH. I will ship at buyers expense, crate will be built and weighs around 150lbs. FORD RACING 4.6L ALUMINATOR BLOCK...
  3. B

    2001 SVT Cobra Engine Dress-Up Kit???

    Does anyone know of any SVT or Cobra emblem engine dress up kits like the Shelby GT, GT500, GT-H, etc.? I have searched everywhere and cannot find anything similar to those. The only thing that is close is an oil dipstick handle. Any help would be great!
  4. M

    New owner... problems... NEED HELP!

    Ok I just bought a 2002 Lightning about two weeks ago with 40, 000 miles. I now know that the truck had sat forever, and I think that is what causing my problem, maybe. PROBLEM : The truck will run & drive in normal driving situations ( grandma driving ). But when I go to punch it or...
  5. 0

    idling problems

    hey guys i got a 2.2 kb but my car will start for 3 to 5 sec and die but if i give it gas it will keep running. but run very rough, I'm at a lost can anyone help me????
  6. S

    Hey what do u guys think of this for a 1.7kb mach1?

    Ford Racing Mustang Camshaft Drive Kit - Cast Iron Block Applications (01-04 GT) M-6004-462V - Free Shipping! I drive a mach1 low miles with the 1.7 kb s/c and since the mach engines aren't forged like the cobras I was thinking I could add power with this kit rather then amping the boost what...
  7. 98cobra13

    the unknown problem...

    Hey guys, im new to svtp forums, i was directed here after other forums members were unable to help specifically with my cobra's problem. I have a 1998 cobra, 85k miles on the motor. It will bog down if i really get on it in any gear, around 3000-4000 rpm's. I can not find what is wrong with it...
  8. C

    04 svt cobra 150 compression results.

    First of all im new to svt. I recently found one i liked and had a compression/inspection done. The compression test was done at a ford dealership. They told me that it looked excellent and that all cylinders came back at 150 psi +\- 5 psi. I figured that seemed a little low. Im not sure if they...
  9. 04greengolbin

    just blew my heads and i need some help

    i'm new to having a cobra just bought it a few months ago only had 14,000 miles on it. it has 18,500 on it now. so i just got a full complete color change to it. as i am leaving the paint shop and i get on the freeway a few miles into it i see i big piece of metal shard on the road had no time...
  10. 0

    Looking for an affordable svt manifold assembly

    Hi everyone I'm looking to do some upgrades on my 2000 Mercury Cougar by adding contour svt (98-00) parts. I'm having trouble finding affordable parts, I need an svt upper intake manifold, svt throttle body, svt body bracket, and a cruise control cable as well. Some assistance would be great.
  11. J

    Muffler delete?

    I was doing some research and got a tip to keep the svt exhaust and res but just delete the mufflers. If anyone could explain how to go about this it would be greatly appreciated. :burnout:
  12. Gbone

    00' and 02' GT Harnesses

    I have just about every electrical component and wire harness there is for an 02' GT as well as the TPS Harness off of an 00' GT. Prices are all easy, make offers and tell me what ya need. Call/Text, 918-859-6565.
  13. J

    96-98 Cobra Camshafts and other Parts

    Out of a 1996 Cobra with 60K. $200 shipped-- intake cams --SOLD! Still have exhaust cams -- make offer I also have the coolant crossover pipe in great shape $45 shipped Valve Covers with Coil Covers - (01+) --SOLD!! Lower and upper intake manifolds $275 shipped Upper Intake Plenum...
  14. Monsterkobra

    wtb: 94-95 mustang 5.0 motor and t-5 trans

    delete
  15. J

    Engine Whine Question

    This may be a silly question but what is it that make the whining sound??? Is it the supercharger????or what???
  16. 03bananacobra

    upgrade options need suggestions

    im looking to make more power. i got seimans 60lb metco 2lb lower crank sct 2600 maf crower stage 3 cams. im looking to do a posi ported blower but i was wondering if any one can shed some light on what im going to need too support these mods like fuel upgrades and etc. any suggestions of routes...
  17. SGT3670

    03/04 Cobra Engine Parts for Sale

    03/04 Cobra Engine Parts Sold SOLD Very nice 03/04 Cobra Parts for sale. A
  18. J

    1993 Taurus SHO Major Issues Most Likely

    So I will try to explain this the best I can...I have a 93 Sho with auto tranny anyway my car when cold starts perfectly fine fires right up and runs great but when i shut it off and tried to start it not too long after with the engine still warm it would be very hard starting and would sound...
  19. 0

    Need Help: Crack in Intercooler With Pictures

    Car started to bog on way home from work a week ago, and completely died when I parked it last. Had the intercooler reservoir sucking in air and losing coolant. While trying to diagnose it, the car died. It wouldn't start, just turn over but never caught. I tried twice and figured I'd...
  20. 0

    Water Might Have Froze in Intercooler

    Bought this car a few months ago and we had a freak freeze (New Mexico), which caused some issues with the intercooler reservoir. It was hissing and squealing with the pressure being released (lethal performace intercooler res.) and I talked to Lethal Performance about getting a new cap for...
  21. Svtracer

    Fs/FT - 02 redfire mustang gt 5spd ( shell)

    **PLEASE DON'T COME IN HERE TO POST NON SENSE IF YOU DON'T LIKE THE PRICE MAKE ME AN OFFER OR KEEP LOOKING ON THE FORUM Ok guys I hate to do this but its time for the gt to go. I had big plans for it but after the stock motor blew up and with my recent purchase of a 4v cobra. I am no longer...
  22. bullitt4593

    Teksid aluminum block---> no main caps

    the guy i bought it from on Ebay stuck it to me good. i bought it thinking it was complete and wanted to build my own engine from that. turns out the main bearing caps didn't come with it, i called FORD and you can't buy them, they only come with a new engine block, SWEET! so i'm thinking of...
  23. L

    03-04 Front Engine Cover

    I have a front engine cover off of a 2004 Cobra. Under 5K miles. Im asking $150 obo. For pictures emial [email protected]
  24. S

    03/04 cobra "Terminator" engine

    Looking for a 03/04 "terminator" engine and tranny auto for my 01 gt. Looking to swap for the terminator engine. Anyone help me out on where to find one?
  25. B

    03/04 Terminator Motor For Sale (FL)

    Trying to sale locally (Jacksonville, Fl.) **Not parting out** Short block is assembled with ARP crank & rod bolts. MMR side bolts. Motor is 2003. Block (iron) was machined and painted with brass freeze plugs installed. Piston was replaced with OE. Heads are 4 thread 2003 (have ARP head...

Top