Ford Racing Shelby GT500 113mm Cold Air Tuner Kit
Designed for those that want the Ford Racing intake for aftermarket performance tuning/calibration.
Kit comes with hardware only! Calibration not included! Kit intended for aftermarket calibrators.
Ford Racing Cold Air Kits utilize...
A few parts I have left over in my garage… hopefully someone is looking for these parts
PM me, email [email protected] or FOR QUICKEST RESPONSE text 7573034356
• 99-04 Steering column gauge pod SOLD!
• 99-04 Autometer single gauge pod $20
• 90mm Motoblue idler kit...
So I have a 2011 gt500 and I will be putting a jlt big air intake with off road x pipe and 3 inch MagnaFlow exhaust with a custom dyno tune next saturday. What kind of power gain should I expect from this?
Will be selling a Roush CAI from my 2014 GT. Intake has roughly 2000 miles on it and has no wrinkles/looks brand new. Also comes with foam insert for 13/14s with the heat extractors. Asking $120 OBO plus the ride. Feel free to PM or text at 586-913-3749 anytime.
Hello, I have sold my car and I have the following items for sale:
Boss intake $425 shipped
Boss Air Raid Cold Air Intake $250 shipped
Boss Brace - has rub marks from shipping, see...
I had this on my car for less than 2000 miles. I sold my GT500 with around 5K (I forget exactly, but damn I miss her). ANYWAYS, I was doing some cleaning as I recently moved out of my parents' place (insert millennial jokes here) and I found this and my stock exhaust so I'm putting them for...
hey guys I have a 2012 5.0 with pypes longtubes, off road x pipe. I just installed the magnaflow competition catback, boss intake, and the jlt cai all at once and I tied it off with a bama 93race tune. the car didnt have the power it had in the low end and somewhat even the upper end. with the...
I have a JLT Cold Air Intake for sale. It came off of an auto GT so it does have the automatic fitting, and the drilled hole where the fitting goes. I don't see an issue with someone plugging it and maybe using a sealer on it if they own a 6 speed. Up to who ever though. Comes with the firewall...
Hey Guys,
Put a blower on my 5.0 so now I have my JLT Carbon fiber intake sitting here. It's 100% complete and it's in great shape as it only has about 1 summer (3000 miles) of use on it. Please text for pics 262-224-2469.
These list for $429.99. Asking $275
Thanks in advance,
Jason
Hey guys, ive got an early model JLT high boost cai in carbon fiber, has the filter, maf adapter, and coupler. There are two holes drilled in the main pipe for the IAT and the crankcase vent line, looking to get $150 shipped, if you have any questions let me know. Phone number is 678-732-8439.
Selling my stock blower parts. Only 15k miles on them. Asking $450 for blower, elbow, and 2.5 vmp pulley. Will sell the stock intake and throttle body with the rest for $600. Buyer responsible for shipping. I live in the Jacksonville, FL area if anyone wants to do local pick up. Thanks!
All parts I have for sale are off of a 2001 Lincoln Navigator with 115k miles, all parts are in good working condition. Prices don't include shipping or PayPal fees.
1. Complete Navigator heads with cams and secondary chains, never disassembled - $425
2. Complete Navigator upper and lower...
So I am thinking about selling my Boss Intake Manifold. it is in pristine condition with only 7500 miles. I bought it from a friend on Facebook. I have actually never put it on my car. I wasn't thinking when I bought it. I have an automatic with 3.15s and a stock converter. I won't really gain...
Item is located near Raleigh, NC. $100 pick up. $115 shipped to 48 states.
In an excellent condition. Filter is more than clean enough to install as is without cleaning it. No holes, tears, or dried out element on the filter. Taken off of my dad's 04 Cobra with approximately 5000 miles on...
Recently installed a KB 3.6lc supercharger on my 13' gt500. I have all of the parts that came off minus the supercharger. Also replaced the rear tires. They have 6000 miles on them. Make an offer on anything listed. Thanks.
EDIT i also have the stock headers.
I have for sale my stock air box, filter, intake piping, and sound tube. They have very few miles on them, but I don't know exactly, as they came with (but not on) the car. My best guess is less than 5000 miles, because the shipping label for the my Airaid intake is early 2011, and I purchased...
I'm new to the forums and was looking for some guidance. I have a 2010 GT500 Convertible which is stock except for Ford Racing KR Axle Backs and a JLT Intake Tube.
1. I was looking to do some mild upgrades including the Ford Racing Throttle Body (65mm?) and SCT Tune and was wondering if...
rKmfg9AgC78
791100 Focus ST COBB Cold Air Intake System Focus ST 2013-2014 | CJ Pony Parts
If you're looking to make extra horsepower in your 2013-2014 Focus ST, this COBB Cold Air Intake System is the ideal part for you. COBB's Cold Air Intake System replaces the restrictive factory...
I am selling a Hyland ported 99/01 intake. Made 619/619 on a F1a setup through a C4 @18 lbs. Intake was sent to Hyland cut apart, ported and tig welded back together. There is a lot more potential in this intake. Upper has been modified to accept the IAT2 out of a Cobra. Includes upper, Lower...
pH1krU5s5Fw
421609 Mustang Roush Cold Air Intake Kit Focus ST 2013 | CJ Pony Parts
This Roush Cold Air Intake Kit is for the 2013 Focus ST and will add horsepower, along with enhanced sound to your car. Included in the kit is a premium high flow air filter, a silicone coupler, an aluminum...
CJPP Installs Ford Racing's Boss 302 Intake Manifold
CJPP's Project 2013 "Gotta Have It Street" gets a boost in power and attitude from FRPP's popular Boss 302 Intake Manifold
<iframe width="960" height="720" src="//www.youtube.com/embed/ds3gGxe7_AU" frameborder="0" allowfullscreen></iframe>...