I have tuned my car with SCT Pro racer, and just converted my car to E85.
I have full bolt-ons and a ported Eaton with 2.8 upper and 4 lower pulley, making abount 17 psi.
I am woundering how the timing chart should look like, right now I am running the timing chart from SCT on race gas tune...
Hey guys.
Im needing some advice.
i have a 1997 Cobra.
and I'm having some issues.
im getting Okay Gas mileage but usually it's gone to shit on short trips around town which I don't know why. It was the same on my 03 V6 and my brothers 97 GT. And I'm having misfiring issues. In the mornings or...
Can someone help me out here? I've looked around and can't find a thread on the combination of reasonably high boost for 93 octane with the cams (9:1 Compression on built motor). I was hoping someone could confirm TR6 is still the right plug and what gap to use with this setup. Thanks!
car is bone stock im replacing them this weekend, which plugs are best for the car that is stock atm and plan to throw in basic bolt ons nothing serious. are the stock plugs best or what would be better and gap?
My 03 cobra has 3" exhaust, off road x pipe, conical filter, diablo sport predator
And just had a 2.81 upper put on. I'm running the 91 pulley tune.
Under wot the car runs awesome till 4500 or so and acts like its blowing spark out. Waiting on custom tune but wanna play a little till then.
Any...
03 Termi loses lots of power at WOT. Stutters badly whenever you punch it. I've cleaned the Air filter, IAT, MAF, new FPDM, new FRPS, new TR6's gapped at .32, new fuel filter, new PA Performance 130A alternator, and checked resistance on the injectors all read 15ohms.
Here's a few datalogs...
Time to clean out the garage...and sell some old stuff! No trades, will take PAYPAL or cash.
MSD IGNITION PN: 32219 - $50
Fits all 96-97 Cobras
Following info taken from Summitracing.com for those interested: ---------
MSD Ignition
MSD 8.5mm Super Conductor Spark Plug Wire Sets
Spark Plug...