'13 GT500 parts that will retrofit to any '07-'12...

[69-sagittarius]

Justin is correct. Tie rod protection? Maybe, depending on how you use your car...

2005-2013 MUSTANG HIGH PERFORMANCE BRAKE COOLING SHIELDS | Part Details for M-20045-MSVT* | Ford Racing Performance Parts

Thanx a lot for this information.
But in the rear how is it here with the 2013 14" Rotors.
Has Ford/SVT installed larger dust shields/brake backing plates on the 2013 or are these the same as in the previous models? :shrug:

 

[Justin@VMP]

BTW, on the ic pump, the 13 pump flows so much ford added a bypass line around the reservoir.

 

[Justin@VMP]

14in rear brakes just use the previous models splash shield.

 

[Katmandu]

So will the tail lights fit on the 10-12?

Someone above said you would need to change out the rear bumper cover as well.

Can someone please confirm this.

 

[69-sagittarius]

Someone above said you would need to change out the rear bumper cover as well.

Can someone please confirm this.

That´s correct and of this reason it makes sense to take the 2013 mufflers too :burnout:

 

[HooperWest]

Front (15") rotors:

Rear caliper relocation brackets:

Interesting how the new '13 Rotors are US Made as opposed to Italian.

 

[alghanim]

Hello to All,

I am following this thread with very much interest
i have 2013 used parts :Engine ,trans,drive shaft,ECU,fuel tank
can i but them on my 2007 ,is there any modification required
thanks in advance
alghanim

 

[2nd2none]

Will the complete exhaust including the manifolds from the 2013 be a direct swap into a 2010+. Assuming of course I get the new rear bumper/valance to fit the exhaust tips

 

[gerbie28]

Will the complete exhaust including the manifolds from the 2013 be a direct swap into a 2010+. Assuming of course I get the new rear bumper/valance to fit the exhaust tips

Has anyone tried this swap yet??

 

[Tob]

Manifolds - yes.

Catted 'H' pipe - yes for '11/'12 and no for 2010 and earlier.

Cat back - minor tweaks would allow it to fit the 2010 and it should fit the '11/'12.

 

[gerbie28]

how about the 13 rear bumper/valance is it a direct fit?? would the rear lights have to changed out from 10-12 to 13's style rear lights

 

[19COBRA93]

how about the 13 rear bumper/valance is it a direct fit?? would the rear lights have to changed out from 10-12 to 13's style rear lights

Several guys have done the rear valance/mufflers. There is a part on the main bumper cover itself that needs to be trimmed, but otherwise it seems to all work.

 

[gerbie28]

Several guys have done the rear valance/mufflers. There is a part on the main bumper cover itself that needs to be trimmed, but otherwise it seems to all work.

any pics? i would like to see a 10-12 with a 13 rear end bumper cover

 

[Crowley]

Anyone know if you can get the leather shift boot and parking break level boot from the 2013s and put onto a 2012 (and what would be involved in that)?

I just like that look better.

thanks,
Crowley

 

[Sonic 03 Cobra]

Anyone know if you can get the leather shift boot and parking break level boot from the 2013s and put onto a 2012 (and what would be involved in that)?

I just like that look better.

thanks,
Crowley

I did not even realise they were different. Looking at the photos, I'd be interested in this answer as well. I did pull out the console when I put in my MGW, and if memory serves it should not be too difficult to make the swap.

Edit: looks like the 2011 boot is $35 through tousley, so the 13 should be available too.

 

[SuperFly03]

Anyone have info on swapping 2013 gauges into a 2010? I'd like to get the speedo with the extra room and the LCD display.

I'm sure it's not as simple as just a swap. There has to be some computer work involved, which is fine by me.

 

[moncho]

Maybe coming across some '14 SVTPP wheels and was wondering what should be my concerns on getting them to work on my '07. Current wheels are OEM P255/45Z R18 (Front) & P285/40Z R18 (Rear). New SVTPP rims/tires are P265/40-19 (Front) & P285/35-20 (Rear). Beside making a tune adjustment for the obvious tire size difference what else should I be concerned about? Possibly fitment & TPMS?

Don't know if this was talked about on this thread as there are many pages to sort through.

Wonder if they would look good on my '07 Tungsten/silver stripe combo?

Cheers,
Ray

 

[stkjock]

/\ nothing

you'll just have to have the TPMS synced for the new set up

 

[19COBRA93]

Maybe coming across some '14 SVTPP wheels and was wondering what should be my concerns on getting them to work on my '07. Current wheels are OEM P255/45Z R18 (Front) & P285/40Z R18 (Rear). New SVTPP rims/tires are P265/40-19 (Front) & P285/35-20 (Rear). Beside making a tune adjustment for the obvious tire size difference what else should I be concerned about? Possibly fitment & TPMS?

Don't know if this was talked about on this thread as there are many pages to sort through.

Wonder if they would look good on my '07 Tungsten/silver stripe combo?

Cheers,
Ray

/\ nothing

you'll just have to have the TPMS synced for the new set up

The '10-14 TPMS sensors won't work in the 07-09 cars. They work off a different frequency. You'll need to swap in 07-09 sensors. Aside from that, there will be zero issues with swapping them on.

 

[stkjock]

The '10-14 TPMS sensors won't work in the 07-09 cars. They work off a different frequency. You'll need to swap in 07-09 sensors. Aside from that, there will be zero issues with swapping them on.

thanks for the correction Sam