• Welcome to SVTPerformance!

'13 GT500 parts that will retrofit to any '07-'12...

Discussion in 'SVT Shelby GT500' started by Tob, Nov 15, 2011.

  1. moncho

    moncho Active Member Established Member

    Messages:
    409
    Joined:
    Oct 12, 2011
    Location:
    Out West
    Wonder how pricey the TPMS' are? Would like to keep things intact on the OEM's, but if they are pricey I can just have the local tire shop swap them.

    Thanks for the responses guys!

    Cheers,
    Ray
     
  2. 19COBRA93

    19COBRA93 Tire shredder Established Member

    Messages:
    4,900
    Joined:
    Jul 9, 2003
    Location:
    Clinton, Utah
    You can usually find a good used set for $100-$120. New through Ford they're over $250 for the set.
     
  3. moncho

    moncho Active Member Established Member

    Messages:
    409
    Joined:
    Oct 12, 2011
    Location:
    Out West
    I'll start looking. Thank you sir!

    Cheers,
    Ray
     
  4. moncho

    moncho Active Member Established Member

    Messages:
    409
    Joined:
    Oct 12, 2011
    Location:
    Out West
    Last edited: May 9, 2013
  5. 19COBRA93

    19COBRA93 Tire shredder Established Member

    Messages:
    4,900
    Joined:
    Jul 9, 2003
    Location:
    Clinton, Utah
    It's exactly the same as the 07-12.
     
  6. moncho

    moncho Active Member Established Member

    Messages:
    409
    Joined:
    Oct 12, 2011
    Location:
    Out West
    ^^ Thanks for the reply.
     
  7. Tob

    Tob Salut! Staff Member Super Moderator

    Messages:
    10,078
    Joined:
    Mar 17, 2009
    Location:
    The Ville
    I'm picking up a set of 10 mile take-off '13/'14 Bilstein Damp-Tronic's.

    KGrHqJrgFE4V3qTM4BRfeC0KjQ60_57_zpsd98c5942.jpg

    I know I'll have to provide power to them via a custom pigtail harness. Not sure if 12v activates the 'Sport' setting or the 'casual' setting. I'll have to talk to Bilstein about something similar to what adorned the development cars.

    2013-ford-shelby-gt500-23_gallery_image_large_zpsb9838ad9.jpg

    The OEM '13/'14 cars integrate much more than a simple on/off switch. According to 5.0 Magazine...

    I already have the FR500S ABS module (defaults TC to off at startup), don't have to worry about nibble control (hydraulic rack), and probably have more rear brake bias than the stock percentage via the 13" FTBR brakes I installed.

    I may team these with an FRPP spring and MM C/C plate as well. Should be a fun project.
     
  8. 03 DSG Snake

    03 DSG Snake Unknown Cyborg Established Member

    Messages:
    20,632
    Joined:
    Nov 3, 2002
    Location:
    CA
    Oh wow. That is so ****ing naughty. One of the bits from the new cars I am most jealous of, can't wait to see your findings.
     
  9. 19COBRA93

    19COBRA93 Tire shredder Established Member

    Messages:
    4,900
    Joined:
    Jul 9, 2003
    Location:
    Clinton, Utah
    I'm very interested in what you come up with on the shocks and struts. That's something I've been eyeing for a while.
     
  10. Devious_Snake

    Devious_Snake PSR Major! Established Member

    Messages:
    9,980
    Joined:
    Dec 25, 2011
    Location:
    Hell
    In for the bilstein swap and enormous Tob discertation on the install!
     
  11. 89Saleen215

    89Saleen215 Member Established Member

    Messages:
    196
    Joined:
    Oct 5, 2011
    Location:
    WA
    +1 subbin' again for Tob :) The electronics and how to put the button in "cleanly" like the '13/'14 are what stopped me...ok, finding a decent price would help...$500 each (x4)?? Looking forward to your findings.
     
  12. 03 DSG Snake

    03 DSG Snake Unknown Cyborg Established Member

    Messages:
    20,632
    Joined:
    Nov 3, 2002
    Location:
    CA
    Could do it like the engine start add ons: [​IMG]
     
  13. Tob

    Tob Salut! Staff Member Super Moderator

    Messages:
    10,078
    Joined:
    Mar 17, 2009
    Location:
    The Ville
    Like a loud bang that turns you around to see, you've got me thinking in a direction I hadn't considered. Thanks for the much needed jolt Ron.
     

Share This Page