• Welcome to SVTPerformance!

1995 Cobra R information and parts identification thread

Discussion in 'Cobra R's' started by 93SVTCobra, Jan 1, 2019.

  1. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    As I've been restoring a GS raced 95 Cobra R I'm starting to pull out a lot of my loose parts. I thought it might be a good idea to start putting the pictures with part numbers online under one thread so that others can see what parts look like. There are some other documents that myself and others will probably upload as well.

    I'm finding that there's a lot more to these cars that just replacing the stock 5.0 with a 5.8.

    Below is the parts list of unique parts on the 95 Cobra R.
     

    Attached Files:

    BLU7710 likes this.
  2. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    Unique upper intake manifold F5ZV-9424-AA

    F5ZV9424AA 2.JPG F5ZV9424AA (2).JPG F5ZV9424AA 4.JPG
     
    Last edited: Jan 1, 2019
  3. specracer

    specracer SVTOA MCA Premium Member

    Messages:
    790
    Joined:
    Sep 27, 2009
    Location:
    MA
    Thanks for the parts list. I have it, but on paper. Good to have electronically. Let me know if you want me to send any more pictures your way.
     
  4. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    F4PU9E926AA (M-9926-B50) Throttle body (this is the Motorsports replacement part so the date code is not correct but otherwise it is identical to the stock part)

    F4PU9E926AA 2.JPG F4PU9E926AA 3.JPG F4PU9E926AA.JPG
     
    Last edited: Jan 1, 2019
  5. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    F5ZV9428BA and F5ZV9429BA exhaust manifolds (sold as Motorsports part number M-9430-R58). Easiest way that I have found to identify the real ones is if you look at the drivers side header the second tube from the rear has a pretty substantial dent in it to clear the steering shaft. This is not present in aftermarket shorty headers.

    F5ZV9428BA.JPG F5ZV9429BA 2.JPG F5ZV9429BA.JPG F5ZV9428BA 4.JPG
     
    Last edited: Jan 2, 2019
  6. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    F5ZV9R504AA - air intake tube assembly (does not include MAF)

    F5ZV9R504AA 1.JPG F5ZV9R504AA 2.JPG F5ZV9R504AA 3.JPG F5ZV9R504AA 4.JPG F5ZV9R504AA.JPG
     
  7. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    F5ZV10239BA - Alternator mounting bracket (this part looks pretty crude but is how they came. I've looked at a few of them and they are all similar. Also note the stamped in part number)

    F5Zv10239BA.JPG F5Zv10239BA 3.JPG F5Zv10239BA 2.JPG
     
    98 svt likes this.
  8. tomshep

    tomshep Another R Addict Established Member

    Messages:
    3,795
    Joined:
    Feb 9, 2003
    Location:
    Republic of Texas
    Not trying to steal your thunder, but I will comment as this thread gains traction. This assembly is identical to a 5.0 upper other than the "8" on the intake, which required a new part number. Many of the race teams took the 5.0 upper and welded the "0" sold and ground them out to create an "8". The lower was the same as a Lightning.

    Tom
     
  9. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    Not stealing thunder at all Tom, in fact I encourage the dialogue as this is how we learn about these cars. I don't remember but if you have one of the modified ones I'll add the picture to the same post as the stock intake so that people can see the difference. You bring up another point in that I believe the cast part number on the 95R is the same as a base Cobra intake.
     
  10. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    Engine oil cooler and brackets (these are identical to the 93R parts down to the part number)

    F3ZV6A642AA - Hayden decal and F3ZV part number present on original piece but not on Motorsports replacement.(upper part is original piece and lower part is Ford Motorsport replacement M-6642-R58) F3ZV6A642AA 3.JPG F3ZV6A642AA.JPG

    F3ZV6A642AA 2.JPG

    f3ZV6b846AA

    F3ZV6B846AA.JPG F3ZV6B846AA 3.JPG

    F3ZV6B847AA

    F3ZV6B847AA.JPG
     
    Last edited: Jan 2, 2019
  11. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    F5ZV8A261AB and F5ZV8A211AB (these are stock pieces that have an additional triangle piece added to fill the gap due to the fact that the radiator is actually tipped rearward when installed. New piece is pop riveted in place.

    F5ZV8A211AB 2.JPG

    F5ZV8A211AB - radiator air deflector RH

    F5ZV8A211AB.JPG

    F5ZV8A261AB - radiator air deflector LH

    F5ZV8A261AB 2.JPG F5ZV8A261AB.JPG
     
  12. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    F5ZV2A032AB (Ford Motorsports M-2032-R58) - Master cylinder - 1" with larger reservoir (easiest way to identify is the yellow cap and rubber band and reservoir is larger than stock)

    F5ZV2A032AB 3.JPG F5ZV2A032AB.JPG F5ZV2A032AB 2.JPG
     
    Last edited: Jan 2, 2019
  13. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    F5ZV6582BA - RH Valve cover (main difference is the additional kinked tube added)

    F5ZV6582BA 2.JPG F5ZV6582BA 3.JPG F5ZV6582BA.JPG

    Here is the LH valve cover which is identical to a stock 94-95 Cobra valve cover except the decals are different. 5Y443D2 is the internal part number for a 5.8L 95 Cobra R engine.

    F5ZV8583BA 4.JPG F5ZV8583BA 2.JPG F5ZV8583BA 3.JPG F5ZV8583BA.JPG
     
  14. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    F5ZV8C045AC - reservoir assembly - Rad coolant recovery (attaches to the front bumper beam on the drivers side)

    F5ZV8C045AC 3.JPG F5ZV8C045AC (2).JPG F5ZV8C045AC 8.JPG
     
  15. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    F5ZV12B581 - IRCM Module & Bracket assembly (module is the same as a GT/Cobra but bracket is unique)

    F5ZV12B504AA 1.JPG F5ZV12B504AA 2.JPG F5ZV12B504AA..JPG
     
  16. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    Radiator brackets

    F5ZV8A433AA - bracket, radiator mount: RH lower
    F5ZV8A433AA (2).JPG F5ZV8A433AA 2.JPG

    F5ZV8A434AA - bracket, radiator mount: LH lower

    F5ZV8A434AA 2.JPG F5ZV8A434AA.JPG

    F5ZV8084AA - grommets, radiator mounting lower (requires 2)
    F5ZV8084AA. 2.JPG F5ZV8084AA.JPG

    F5ZV8B359BB - Bracket, radiator mount, upper (requires 2 brackets)

    F5ZV8B359BB 2.JPG F5ZV8B359BB.JPG

    I don't have the original bushings for the upper brackets but after looking at some original ones I found the upper radiator brackets from O'reilys to look very similar and function the same.

    DOR 924-425

    DOR 924-425 2.JPG DOR 924-425.JPG
     
  17. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    F5ZV8C278BA - Mtg bracket, shroud LH (This bracket attaches the fan shroud to the larger Cobra R radiator)

    F5ZV8C278BA - Copy.JPG F5ZV8C278BA 2.JPG F5ZV8C278BA 3.JPG F5ZV8C278BA 4.JPG F5ZV8C278BA 4.JPG F5ZV8C278BA 5.JPG F5ZV8C278BA 6.JPG
     
  18. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    F5ZV19A286AA - Under hood Emissions label

    F5ZV19A286AA.JPG F5ZV19A286AA 2.JPG
     
  19. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    Cooling system caps

    F5ZV8100AB - Cap Assy radiator

    F5Zv8100AB - Copy.JPG

    E9SH8100AA - Cap assy - Air separator tank (the original caps have the red and white printed on the cap. I have seen some on ebay which are a sticker which is a reproduction and NOT the real deal)

    E9SH8100AA.JPG
     
  20. 93SVTCobra

    93SVTCobra Active Member Established Member

    Messages:
    3,431
    Joined:
    Aug 26, 2001
    Location:
    Milford, MI
    F32Z8Z080A - Tank assy - Air separator (this part can be found on 93-97 Ford Probes)

    F32Z8Z080A 2.JPG F32Z8Z080A 3.JPG F32Z8Z080A 4.JPG F32Z8Z080A.JPG
     

Share This Page