1999 - 2001 Cobra Differences

Boss75

Shoot first
Established Member
Joined
Jun 3, 2006
Messages
1,298
Location
Texas
Here is a thread which I'm hoping will encompass everything that is different between the 99 and 01 model years. These questions get asked frequently so I'll try to cover everything. For what I miss, just post up and I'll add it.

Exterior

The exterior of the 99 and 01 models are very similar. The 99 rear bumper reads "Mustang" while the 01 rear bumper reads "Cobra". Both cars come from the factory with a pony in the grill but many choose to remove it and replace it with a snake.

The wheels for the 99 are silver powdercoated 17x8. The 01 also had the powdercoated wheel but you had the option of rolling on polished wheels. Same style wheel just different finishes.

The headlights between the two are a little different. The 99 sports chrome/clear headlights and the 01 has smoked headlights.

There is also a tiny difference in the badging of the Cobras. The 99 rear SVT badge also says "Cobra" underneath it while the 01 badge is slightly smaller and reads only "SVT".

Different color options were also available for both years. In 99 you could only get the Cobra in Black, White, Rio Rally Red, and Electric Green. For 01 they removed Rio Rally Red and Electric Green and added Laser Red, Satin Silver, True Blue, Mineral Grey, Performance Red, and Zinc Yellow.

Both Cobras also had different wings on the decklid. Here's some pics...
99:
99wingEdit.jpg
01:
01wingEdit.jpg


Interior

The interiors are quite different between the two years. The 99 came decked out in all leather, essentially the same as the same year GT. The 01 Cobra got upgraded seats with better support and a synthetic microsuede strip down the center of the seats. The 01 also got a rearanged console moving the fog light switch from behind the cup holders where they are in the 99 to next to the traction control infront of the shifter. This allowed the cup holders to be shifted back and used easier. The 01 also had an interior trunk release pull and child safety seat anchors in the rear and the 99 did not.

Both 99 and 01 Cobras had traction control.

The 01 also got an Emergency brake boot and the 99 did not.

In 01 Ford decided the Cobra would get a 6 CD in dash changer. The 99 only had single CD capability.

Both model year Cobras had white faced guages with the 99 having a blue backlighting and the 01 having a green backlighting.

Engine

The engines in both these cobras are essentially the same with a few very minor differences. Here's probably where I'm going to start leaving things out so post up if you spot something.

The 99 has an issue often called "The Fix". The problem was that the 99 Cobras weren't producing the numbers they should have been on the dyno so Ford recalled a lot of them. The intakes were either acid dipped or extrude honed and the catback was replaced with a more free flowing one. They also reflashed the PCM. If "The Fix" was performed on your 99 you will have a dot on the driver side front corner of your intake manifold with a green dot representing acid dipped and a blue dot if your intake was extrude honed.

Another difference was the block used. All 99 Cobras recieved the Teksid block while only some 01's did. Other 01's that did not get the Teksid instead recieved a WAP (Windsor Aluminum Plant) block. For more on that see quadcammers post in the 99/01 FAQ.

The pulley arrangement is different from the 99 to the 01. The 01 has a different timing cover and an extra idler giving it a different belt route. It also had a one bolt tensioner vs a three bolt on the 99. I've also heard that the 01s had a little more timing to combat the recall the 99's had. *See diagram at bottom.

The 99 intake tube included rubber ribs but were deleted for the 01.

Drivetrain

The 99 Cobra uses the T-45 5 speed transmission. The 01 uses the TR3650 5 speed transmission. Also in 99 the Cobra had 28 spline axles in the rear while the 01 got 31 spline axles.

Belt Route Diagrams
99beltEdit.jpg
01beltEdit.jpg




Alright so that's all I can remember at the moment. Post up and tell me what I forgot. :D
 
Last edited:

Quadcammer

4cams aren't better then1
Established Member
Joined
Nov 21, 2002
Messages
11,540
Location
jersey
just a few things.

1. the 01 came stock with the same painted wheels, but the polished wheels were an option.

2. The 01 also came with a 6 cd in dash vs a 1 cd on the 99

3. The 01 has a rubber intake tube without the upper ribs that the 99 had.

4. The 01 also had performance red as a color option

5. The 01 has a different timing cover, hence different belt routing. It also has a 1 bolt tensioner vs 3 bolts, and an extra idler.

Thats about it that I remember. Here is a belt routing comparison

01
01belt.jpg


99
beltroutingdiagram.jpg
 

Boss75

Shoot first
Established Member
Joined
Jun 3, 2006
Messages
1,298
Location
Texas
I don't think mods frequent this forum. They all know just how nice we are to each other. :)
 

AJRED99

"Almost Stock"
Established Member
Joined
Aug 20, 2005
Messages
521
Location
SoCal
The "fix" dots were green or blue, green being acid dipped and blue being extrude honed. The dots were also located behind the alternator on the intake manifold near the right front corner. Hope this helps.
 

quick01snake

Your View
Established Member
Joined
Sep 26, 2001
Messages
7,174
Location
O'Fallon, MO
on the exterior color options you said they dropped rio rally red for 01, they also dropped electric green...

PLUS, 99 guages and accessories had blue backlighting, 01's had green...01 had child seat anchors on the rear deck, and an emergency trunk release from inside the trunk, 99 had neither of those...
 

brkntrxn

Inappropriate Motorsports
Established Member
Joined
Oct 21, 2003
Messages
3,865
Location
North Carolina
Isn't all this already covered in the FAQs? I posted a bunch on interior pics between the two cars there last year.
 

P49Y-CY

fomocomofo
Established Member
Joined
Jun 21, 2003
Messages
11,218
Location
southwest
question: did both years have traction control? thx

also fwiw, there are a couple threads on this board about "black boxes" and some lists say that ford began installing them in 01 mustangs (but that would prolly be transparent to the owner)
 

Boss75

Shoot first
Established Member
Joined
Jun 3, 2006
Messages
1,298
Location
Texas
brkntrxn said:
Isn't all this already covered in the FAQs? I posted a bunch on interior pics between the two cars there last year.

No. The FAQ's cover technical data and the like and I just wanted a complete comparison between the 2 Cobras since it gets asked about a lot.
 

'95yellowGT

New Member
Established Member
Joined
Jun 5, 2006
Messages
663
Location
Easley, SC
My 99 has the green dot so the intake was acid dipped. Maybe im just a dumbass but i was wondering what that does exactly? and which was better honed or acid dipped?
 

srl135

Wreck 'em Tech!
Established Member
Joined
Aug 27, 2005
Messages
2,035
Location
Pittsburgh, PA
the purpose of the acid dip was to basically bore out the intake manifold for a higher flow rate for better hp. The hone and the acid dip both did the job and as i have understood it..did it equally as well. The honed is just boring out the whole manifold with an actual machine or CNC. same job just one chemical approach and one machining approach.
 

Users who are viewing this thread



Top