2.8 Kenne Bell LC and Bps Fuelrails

Kempf

Member
Established Member
Joined
Nov 26, 2010
Messages
161
Location
Hamburg Germany
Hi.

Last year I ordered a set of fuelrails from Billet Proshop for my 2007 with a 2.8 Lc Kb blower, today my guys tried to install them, and the hose that goes from one side to the other is way to short. I called Billet proshop and they say that it should fit but no way how did you guys install yours?

Thanks
89b45f1ac58360bbd7596493fb9b7d83.jpg
d7f6c5053b936c932ce4838a23106757.jpg
a49bef759cad42be7830707a8f440f70.jpg
ddff74400c3aca325fa18832d74d9edc.jpg
1a8ca9a7c83f571f9afb54449a164769.jpg
c883d7570deae3a26af285953dc8a7db.jpg
feca7762e7131cb2b44efe13003ccfb5.jpg


Sendt fra min SM-G928F med Tapatalk
 

HillbillyHotRod

Hooligan rabble rouser
Established Member
Joined
Jan 9, 2014
Messages
5,735
Location
Ozarks of Arkansas
It appears that the KB manifold has some kind of outlet on the pass side rear. on my VMP it does not have that and it fits. Mine was rubbing the firewall more then I liked so I exchanged the 45 elbows for 90s. I think the BPS would send you a long piece of hose but do not know how it would go around that fitting on the manifold. Maybe someone with a KB can better explain.
 

Sonic 03 Cobra

Yes, that's a 2011
Established Member
Joined
Jun 16, 2002
Messages
1,066
Location
Philadelphia, PA
Yeah you need a longer hose. The hose is fairly cheap. I went with the routing to the front and shorted myself a few inches so it's not routed quite how I'd like due to the same bypass inlet. Suggest you get a longer hose. Should be -8 an, summit carries it by the foot.
4b3dfea6d57459f0867de5213c66e665.jpg
54cc3a6b1e0391c9481cb76e288798ab.jpg
 

04whitesvtlight

the beast is almost mine
Established Member
Joined
Sep 6, 2005
Messages
1,597
Location
moline, il
Yeah you need a longer hose. The hose is fairly cheap. I went with the routing to the front and shorted myself a few inches so it's not routed quite how I'd like due to the same bypass inlet. Suggest you get a longer hose. Should be -8 an, summit carries it by the foot.
4b3dfea6d57459f0867de5213c66e665.jpg
54cc3a6b1e0391c9481cb76e288798ab.jpg
you have your LC lines hooked to the motor coolant right? How is it routed back into the system. I want to set mine up like that so I can run an ice tank.
 

[email protected]

Authorized Vendor
Authorized Vendor
Joined
Feb 24, 2008
Messages
6,964
Location
S. Florida
The rear needs to be capped off and the line from the back of the driver side rail routed to the front of the passenger side rail. You'll need a 45 or 90 degree fitting out of the front of the passenger side rail. With Fore they use a 90 degree fitting specifically for the application.

The reason this may work on a TVS application is the bypass system is completely different and so is the blower mounting. The KB has a lower manifold discharge plate that bolts to the lower intake manifold. That's what some are seeing in these pics if you have not seen a KB install before.

VC
 

Kempf

Member
Established Member
Joined
Nov 26, 2010
Messages
161
Location
Hamburg Germany
Thanks guys.
What irritates me is that i specifily pointed it out that i was going to use this with the Kenne Bell.

Tegards

Sendt fra min SM-G928F med Tapatalk
 

Users who are viewing this thread



Top