• Welcome to SVTPerformance!

20% OFF ALL Mcleod Products for our 12 Days off Christmas Sale here at Lethal Performance!

Discussion in 'Lethal Performance' started by [email protected], Dec 7, 2018.

  1. Chris@Lethal

    [email protected] Authorized Vendor Authorized Vendor

    Nov 30, 2015
    Wellington Florida

    On the 5th day of Christmas, Lethal gives to you 20% OFF of all McLeod Racing clutch kits & accessories!!

    Today only (and Friday, Dec. 21) we are giving you 20% OFF of all McLeod Racing parts. No coupon code is needed, just add to cart & your discount is reflected on the total!

    Need help deciding which clutch you need? Look no further. We've run a McLeod clutch kit in every one of our manual cars since our older GT500s, including our 9-second 2015 Mustang GT. We're also one of McLeod's largest dealers. Check out the video below and let Jared give you the 411 on the different options for clutch kit & slave cylinders so you make sure that you are getting (and saving on) the correct setup!

    Get all that? If not, give us a shout! Any of our reps will be glad to point you in the right direction.


    Here's a rundown of some of our most popular options:

    2007-2009 Shelby GT500

    RST: 6908-07
    RXT: 6918-07
    RXT HD: 6918-07HD
    These come with a lightened steel flywheel & use the factory, longer style slave cylinder.

    We HIGHLY recommend purchasing these kits & not using your factory flywheel as the OEM flywheel has a 7” opening for the hub where the McLeod disc only has a 6 1/8” hub. This causes the friction surface to sit inside of where it meets the flywheel, giving you less contact. This in turn leads to faster wear & improper clutch hold.

    NOTE: If your car has been into Ford for the clutch TSB (10-3-8 or 8-16-4), then you have a 2010+ GT500 clutch & short slave setup in the car and will need the 6975-07M or 6975-07HD setups instead (below).

    2010-2014 Shelby GT500

    RST: 6975-07
    RXT: 6975-07M
    RXT HD: 6975-07HD

    These will all work with your factory flywheel. You do NOT need to purchase a flywheel, no matter that the condition of your stock flywheel is. The 6975-07 series comes built with it’s OWN friction surface that is between the discs and your OEM flywheel. We do offer a stock replacement from McLeod (SKU: 473458) but again, it is NOT needed.

    NOTE: The 6975-07 clutch kits are sprung hub, dampening driveline vibrations & offering smoother engagement than the solid hub setups.

    2011-2017 Mustang GT

    Solid hub RST with Aluminum flywheel: 6335825
    Solid hub RXT with Aluminum flywheel: 6335825M
    Solid hub RXT HD with Aluminum flywheel: 6335825HD

    Sprung hub RST with Steel flywheel: 11176975
    Sprung hub RXT with Steel flywheel: 11176975M
    Sprung hub RST with Aluminum flywheel: 11176975A
    Sprung hub RXT with Aluminum flywheel: 11176975MA

    We know there are rumors & urban legends that the RXT will destroy your MT82 right away, however we’ve run an RXT in ALL of our cars, including multiple MT82s, and we have not had an issue. These cars were NOT babied, either.

    2018+ Mustang GT

    RXT with Aluminum flywheel: 6333825M

    And for the automatic guys...
    McLeod introduces their newest addition!

    10R80 Transmission Friction Plate and Steel Kit: 88098


    Got a trans swap? We've got you covered!

    2011-2017 Mustang with a TR6060 Swap

    If you swap a TR6060 into your car, we will basically treat it as a 2010-2014 Shelby GT500. Here’s what you will need from McLeod:

    RST: 6975-07
    RXT: 6975-07M
    RXT HD: 6975-07HD

    You will also need to purchase a shorter slave cylinder (SKU: DR3Z-7A508-A)


    For the full 19 Days of Christmas lineup, click here!

Share This Page