FOR SALE: 2001 built Cobra f1a procharged

mcobra01

Member
Established Member
Joined
Dec 15, 2002
Messages
309
Location
los angeles
For sale is my 2001 Cobra $24k, I purchased from the original owner. Mileage on the car is 29k and counting as I driving it here and there.

list of mods.


Engine rebuilt 10,000 miles ago

- MMR built long block using brand new Ford block (stock bore)

- Manley pistons (stock compression)

- Manley H-beam rods

- Billet oil pump gears

- Stage 2 ported heads

- Supporting hardware


Power Adder

- Procharger F1a - recently upgraded by Procharger ~4k miles on it

-Procharger racing intercooler

- 2 tunes one with 4” pulley making 20lbs of boost and a 3.4 pulley making 24lbs

646hp 555 torque & 712hp 630 torque both on e85

- 8 Rib set up with Thump Racing tensioner

- Big Red blow off valve

- WMR intake

- Flat black powder coated pipes (where visible)


Exhaust

- JBA shorty headers

- Magnaflow catted x-pipe

- Magnaflow catback system


Fuel System

-ID 1000 injectors

- 03 Cobra fuel tank

- Level 1e kit, 465 pumps, FC3 controller, upgraded F2i regulator, micro glass filter, hobbs switch, fore fuel rails, pre filter fitting and gauge and teflon hose so no fuel weep smell.

- Dynojet Wideband Commander (with programmable warning light and data-logging capability)


Transmission

- Promotion modified T3650 with 26 spline input shaft

- Spec Stage 2+ clutch

- Spec steel flywheel

- MGW shifter


IRS

- MM poly bushings

-rear differential completely rebuilt with less than 1k miles

- 3.55 gears

- Ford racing differential cover

- Level 5 half shafts


Suspension

- 03 Cobra Bilstein struts rear Viking adjustable shocks

- Eibach Pro-Kit springs (no isos)

- MM Caster/Camber plates

- MM full length subframe connectors


Wheels / Tires

- True Forged Speed 5 3-piece polished wheels - Front 18x9 (big brake cut), Rear 18x10.5 (tuck fit)

- Falken RT615 Azenis - Front 275/35x18, Rear 315/30x18
 

Attachments

  • A9DA5990-9AA1-4BC9-98FB-42C6E8CAB27A.jpeg
    A9DA5990-9AA1-4BC9-98FB-42C6E8CAB27A.jpeg
    284 KB · Views: 274
  • 4F2C9B9A-7FF2-46E2-A456-AB6E88D9C8B6.jpeg
    4F2C9B9A-7FF2-46E2-A456-AB6E88D9C8B6.jpeg
    337.8 KB · Views: 278
  • E932E1D4-A098-4E66-A11A-A2B2A1230F89.jpeg
    E932E1D4-A098-4E66-A11A-A2B2A1230F89.jpeg
    342.3 KB · Views: 278

Badaz01

Active Member
Established Member
Joined
Sep 21, 2020
Messages
257
Location
Pennsylvania
For sale is my 2001 Cobra $24k, I purchased from the original owner. Mileage on the car is 29k and counting as I driving it here and there.

list of mods.


Engine rebuilt 10,000 miles ago

- MMR built long block using brand new Ford block (stock bore)

- Manley pistons (stock compression)

- Manley H-beam rods

- Billet oil pump gears

- Stage 2 ported heads

- Supporting hardware


Power Adder

- Procharger F1a - recently upgraded by Procharger ~4k miles on it

-Procharger racing intercooler

- 2 tunes one with 4” pulley making 20lbs of boost and a 3.4 pulley making 24lbs

646hp 555 torque & 712hp 630 torque both on e85

- 8 Rib set up with Thump Racing tensioner

- Big Red blow off valve

- WMR intake

- Flat black powder coated pipes (where visible)


Exhaust

- JBA shorty headers

- Magnaflow catted x-pipe

- Magnaflow catback system


Fuel System

-ID 1000 injectors

- 03 Cobra fuel tank

- Level 1e kit, 465 pumps, FC3 controller, upgraded F2i regulator, micro glass filter, hobbs switch, fore fuel rails, pre filter fitting and gauge and teflon hose so no fuel weep smell.

- Dynojet Wideband Commander (with programmable warning light and data-logging capability)


Transmission

- Promotion modified T3650 with 26 spline input shaft

- Spec Stage 2+ clutch

- Spec steel flywheel

- MGW shifter


IRS

- MM poly bushings

-rear differential completely rebuilt with less than 1k miles

- 3.55 gears

- Ford racing differential cover

- Level 5 half shafts


Suspension

- 03 Cobra Bilstein struts rear Viking adjustable shocks

- Eibach Pro-Kit springs (no isos)

- MM Caster/Camber plates

- MM full length subframe connectors


Wheels / Tires

- True Forged Speed 5 3-piece polished wheels - Front 18x9 (big brake cut), Rear 18x10.5 (tuck fit)

- Falken RT615 Azenis - Front 275/35x18, Rear 315/30x18
Are your pistons flat tops and what compression are you at.
 

mcobra01

Member
Established Member
Joined
Dec 15, 2002
Messages
309
Location
los angeles
Interior and engibe bay pictures
 

Attachments

  • B1ED4187-60C2-41D9-8472-6D823D505E07.jpeg
    B1ED4187-60C2-41D9-8472-6D823D505E07.jpeg
    413.5 KB · Views: 115
  • CBF95C1F-0AC3-4E3D-BB36-5684E2861234.jpeg
    CBF95C1F-0AC3-4E3D-BB36-5684E2861234.jpeg
    359.9 KB · Views: 114
  • BE7ED3BF-515C-4989-9C54-373C5D33F94C.jpeg
    BE7ED3BF-515C-4989-9C54-373C5D33F94C.jpeg
    355.9 KB · Views: 115
  • 62BD89BF-DF1C-4835-96F2-6BF186A08C56.jpeg
    62BD89BF-DF1C-4835-96F2-6BF186A08C56.jpeg
    91 KB · Views: 111

Users who are viewing this thread



Top