2002 Mustang Gt Vortech Build(Coming Soon)

[SCalla1384]

Very nice congrats!! How much boost?

 

[hollowdweller]

very nice congrats!! How much boost?

x2

 

[Stanger00]

That much power probably 11-12 or he is at 10 with max timing around 16-18*. That's a lot for a stock 2 valve. I ran 400 hp through my auto with 13* and 11 psi of boost. Similar setup to OPs car.

 

[96GT/SC]

That much power probably 11-12 or he is at 10 with max timing around 16-18*. That's a lot for a stock 2 valve. I ran 400 hp through my auto with 13* and 11 psi of boost. Similar setup to OPs car.

Really? My 2v ran 10psi with 9° of timing and put down 450 at 5800rpm. At full timing I had 450 at 4k rpm and my tuner got scared. (Had stock bottom end) Didn't think mild crappy cams would make that much of a difference.

 

[spike_africa]

Nice numbers. Good to see more 2v power here.

 

[Capngizmo]

Thanks for you interest Guy's and Gal's

10lbs
15*

 

[98 Roush]

Nice! I was pretty dam close guessing you wrhp @426 LoL! I'm doing my vortech build also should be done in a month can't wait

 

[Capngizmo]

Nice! I was pretty dam close guessing you wrhp @426 LoL! I'm doing my vortech build also should be done in a month can't wait

Awesome good luck...Its pretty straight forward...

 

[Capngizmo]

Gauge install coming soon...

 

[Capngizmo]

Before Gauge install...

 

[Capngizmo]

Tear Down...

 

[Capngizmo]

Dash out, headlight switch unhooked

 

[Capngizmo]

Test fit Gauges check where to cut holes in a Pillar

 

[Capngizmo]

Cut holes in A Pillar

 

[Capngizmo]

Put Pod on A Pillar

 

[Capngizmo]

First set of Wires Ready

 

[Capngizmo]

Gauges set in Wire it up...

 

[Capngizmo]

Install A Pillar

 

[Capngizmo]

Got the tach from Jegs

 

[Capngizmo]

Install Fuel Pressure sending unit