I guess it is time to stop ****ing off and get to work on the Mach 1.
If you buy an EV you won’t suffer through high gas prices. - Peter Buttplug
2003 Mach 1 Project Bad Mach
- Thread starter Deceptive
- Start date
I guess it is time to stop ****ing off and get to work on the Mach 1.
If you buy an EV you won’t suffer through high gas prices. - Peter Buttplug
Thanks to NA SVT I need to stop procrastinating.
If you buy an EV you won’t suffer through high gas prices. - Peter Buttplug
So, there has not been much to report with the Mach 1 as I just have not had time to do anything. This month has been crazy, I worked at Norfolk Naval Station for a few days, went to Florida to see my in-laws, have been trying to finish out my territory for the month in only two weeks, and get ready for our trip to Mexico tomorrow.
With all that said, everything for the long block is at the machine shop and could be done by the time I get back home. I also dropped off the timing cover, steering knuckles, calipers, valve covers, COP Covers, and shaker at the powder coater. Below are pictures from the powder coater.
The shaker and COP covers got done in super matte black, with red, white, and blue lettering. The valve covers and brakes were done in silver vein with “Brembo” in super matte black.
I don’t have the knuckles and timing cover photos but those were done in satin silver.
My math may be off but, I think a quarter midget is a garden gnome.
With all that said, everything for the long block is at the machine shop and could be done by the time I get back home. I also dropped off the timing cover, steering knuckles, calipers, valve covers, COP Covers, and shaker at the powder coater. Below are pictures from the powder coater.
The shaker and COP covers got done in super matte black, with red, white, and blue lettering. The valve covers and brakes were done in silver vein with “Brembo” in super matte black.
I don’t have the knuckles and timing cover photos but those were done in satin silver.
My math may be off but, I think a quarter midget is a garden gnome.
Need pics in the sun when you get your shaker, need to get mine redone
Same here and damn do those brakes look beautiful in that silver vein!
Same here and damn do those brakes look beautiful in that silver vein!
A few things are at the house. Picked up the stuff from powder coat. I also received the oil pan gasket, yeah not sexy. Got the MRT Hood Struts, Accufab Billet Rear Main Seal, and Thump RRR Racing Vortech/Procharger Tensioner.
Yes, I am swapping to 3 Bolt Tensioner on the Mach 1.
The powder coat came out insanely good.
I think I am going to take the 8.8 housing and some other stuff up to get done.
My math may be off but, I think a quarter midget is a garden gnome.
That red white and blue on the valve covers is awesome, well done!
Last edited:
I will start back to getting updates on this project soon. I will say, I spent about $6k the past two weeks.
So, yeah! Updates will start back up soon.
Sent from my iPhone using svtperformance.com
So, yeah! Updates will start back up soon.
Sent from my iPhone using svtperformance.com
I want those calipers
Users who are viewing this thread
