2004 Silver Cobra... Whipple....56k

Swillcobra

New Member
Established Member
Joined
Jan 3, 2010
Messages
25
Location
Delaware
20171125_160525.jpg
20170705_174137_001_resized.jpg
20170904_173508.jpg
20171001_131305.jpg
20170729_190135.jpg
20171201_184135.jpg
20171201_184137.jpg
20171201_184142.jpg
20171205_191409.jpg
20171125_160543.jpg


SOLDDDDD


2004 SILVER COBRA

59*** miles. The car is garage kept and always has been. It has never been daily drive while in my possession. I am the fourth owner. I bought the car back in May of 2015 with 47k. The car was almost completely stock when I got it. I had all of the work professionally done at 56k miles. The installation was done by Matt Goodwin at AMG automotive. The car was tuned by Matt from Performance evolution. The car made 637whp/648tq on 93. It has never been to the track. The car has had no issues at all since the build, it runs like a raped ape. I’m sure I’m forgetting a few things, but the details are below. This car needs nothing. Hard to find a build that is as clean and complete as this one.



I’m asking $24,500. But this price includes 2.5 sets of wheels (one of which is a set of RTS welds with less than 500 miles), extra parts, and a $500.00 car cover. If you aren’t interested in the extras we can discuss the price for just the car. Please no trades. I have receipts for practically everything but the blower.



Any questions please email me @ [email protected] or text 609-820-0202.



Exterior – 8.8/10. The car is 14 years old. I always keep the car cleaned and waxed, but it isn’t perfect. There a few rock chips on the hood.

Interior – 9.2/10. The seats are in great shape. It has the dark charcoal suede inserts. The volume on the radio is tricky. That’s about it.



Engine

- 2.3 whipple supercharger

- 3.0 whipple pulley (extra 3.25 pulley)

- metco 110 idler pulley*

- FORE SN95 4V Level 1 Return Fuel System (dual pump)

- JLT high boost intake

-MMR head cooling mood

- AFCO dual pass heat exchanger

- Bosh heat exchanger pump

- 60lb injectors

- SCT BA-2300 Big Air 90MM MAF Meter / Sensor

- Accufab single blade throttle body

- Custom Catch can set up

- Trunk mounted battery

- Moroso Aluminum Coolant Expansion Tank

- Moroso Aluminum Supercharger Coolant Tank

- Bassani x-pipe

- SLP loudmouth 2 exhaust

- PA alternator 130A 6G with Metco 4” pulley

- DiabloSport hand held tuner (only married to this car)

- N2MB WOT BOX / 2 Step (not plugged in but installed)

Transmission

  • MGW short throw shifter

  • Tremec 26 spline input shaft

  • Mcleod Lightened Steel Flywheel – 8 bolt

  • Mcleod Street Extreme Clutch Kit 26 spline

  • SR Performance clutch adjuster kit
Rear

- FTBR bushings kit

- FTBR diff cover

- 3.73 Ford racing gears

- 2 Ford Racing M-1109-A Independent Rear Suspension Hub

- Extra half shaft

Exterior / Interior

  • Black Emblems

  • Short antenna

  • Hood Vent Scoops for 03-04 Ford Mustang Cobra - Black Billet Aluminum

  • California Car cover - Sunbrella Custom Car Cover
    • Cobra emblem

    • 100% weather proof
  • Drilled and slotted rotors

  • Aeorforce interceptor gauge and steer wheel pod

  • Tinted Tail lights

  • Stock tail lights

  • Tinted head lights

  • Stock Tail lights
Wheels

  • Weld rts s71 wheels 2 - 17x 8 wheels 2-17 x 10 wheels 2-275 40 17 Nitto nto5r tires 4 weld center caps. (maybe 500 miles)

  • ESR SR02 18X9.5 / 18X10.5 W/ 315 30 18 TOYO PROXIES (1500 MILES)

  • Diamond Racing Wheels 16x10 w/M&H Cheater Slicks
    • Where in rough shape until I refinished them
  • The back right tire on both sets wheels is cut into from the fenders not being rolled. It doesn’t affect the tires at all.
-
 
Last edited:

Swillcobra

New Member
Established Member
Joined
Jan 3, 2010
Messages
25
Location
Delaware
as clean as they come
 

Attachments

  • FB_IMG_1505211201778.jpg
    FB_IMG_1505211201778.jpg
    191.7 KB · Views: 410
  • FB_IMG_1505211224628.jpg
    FB_IMG_1505211224628.jpg
    272.5 KB · Views: 515

Swillcobra

New Member
Established Member
Joined
Jan 3, 2010
Messages
25
Location
Delaware
Let me rephrase this for the everyone.... It's never run at the track. It has physically been to the track but it's never made a pass.
 

SteveK

New Member
Established Member
Joined
Sep 28, 2017
Messages
14
If you don't mind me asking where did you get the -AN fittings for the valve covers? Looks really clean.
 

TexasLawDawg

Member
Established Member
Joined
Mar 10, 2005
Messages
508
Location
San Antonio, TX
I didn't see any headers listed. Is this correct? Any additional suspension items not listed? Subframes? Any issue with shipping it? Any other issues with the car you can think of?
 
Last edited:

Frankycheechoo

Member
Established Member
Joined
Nov 26, 2017
Messages
104
Location
Vaughan
View attachment 1449236 View attachment 1449237 View attachment 1449238 View attachment 1449239 View attachment 1449240 View attachment 1449241 View attachment 1449242 View attachment 1449243 View attachment 1449246 View attachment 1449247
2004 SILVER COBRA

59*** miles. The car is garage kept and always has been. It has never been daily drive while in my possession. I am the fourth owner. I bought the car back in May of 2015 with 47k. The car was almost completely stock when I got it. I had all of the work professionally done at 56k miles. The installation was done by Matt Goodwin at AMG automotive. The car was tuned by Matt from Performance evolution. The car made 637whp/648tq on 93. It has never been to the track. The car has had no issues at all since the build, it runs like a raped ape. I’m sure I’m forgetting a few things, but the details are below. This car needs nothing. Hard to find a build that is as clean and complete as this one.



I’m asking $24,500. But this price includes 2.5 sets of wheels (one of which is a set of RTS welds with less than 500 miles), extra parts, and a $500.00 car cover. If you aren’t interested in the extras we can discuss the price for just the car. Please no trades. I have receipts for practically everything but the blower.



Any questions please email me @ [email protected] or text 609-820-0202.



Exterior – 8.8/10. The car is 14 years old. I always keep the car cleaned and waxed, but it isn’t perfect. There a few rock chips on the hood.

Interior – 9.2/10. The seats are in great shape. It has the dark charcoal suede inserts. The volume on the radio is tricky. That’s about it.



Engine

- 2.3 whipple supercharger

- 3.0 whipple pulley (extra 3.25 pulley)

- metco 110 idler pulley*

- FORE SN95 4V Level 1 Return Fuel System (dual pump)

- JLT high boost intake

-MMR head cooling mood

- AFCO dual pass heat exchanger

- Bosh heat exchanger pump

- 60lb injectors

- SCT BA-2300 Big Air 90MM MAF Meter / Sensor

- Accufab single blade throttle body

- Custom Catch can set up

- Trunk mounted battery

- Moroso Aluminum Coolant Expansion Tank

- Moroso Aluminum Supercharger Coolant Tank

- Bassani x-pipe

- SLP loudmouth 2 exhaust

- PA alternator 130A 6G with Metco 4” pulley

- DiabloSport hand held tuner (only married to this car)

- N2MB WOT BOX / 2 Step (not plugged in but installed)

Transmission

  • MGW short throw shifter

  • Tremec 26 spline input shaft

  • Mcleod Lightened Steel Flywheel – 8 bolt

  • Mcleod Street Extreme Clutch Kit 26 spline

  • SR Performance clutch adjuster kit
Rear

- FTBR bushings kit

- FTBR diff cover

- 3.73 Ford racing gears

- 2 Ford Racing M-1109-A Independent Rear Suspension Hub

- Extra half shaft

Exterior / Interior

  • Black Emblems

  • Short antenna

  • Hood Vent Scoops for 03-04 Ford Mustang Cobra - Black Billet Aluminum

  • California Car cover - Sunbrella Custom Car Cover
    • Cobra emblem

    • 100% weather proof
  • Drilled and slotted rotors

  • Aeorforce interceptor gauge and steer wheel pod

  • Tinted Tail lights

  • Stock tail lights

  • Tinted head lights

  • Stock Tail lights
Wheels

  • Weld rts s71 wheels 2 - 17x 8 wheels 2-17 x 10 wheels 2-275 40 17 Nitto nto5r tires 4 weld center caps. (maybe 500 miles)

  • ESR SR02 18X9.5 / 18X10.5 W/ 315 30 18 TOYO PROXIES (1500 MILES)

  • Diamond Racing Wheels 16x10 w/M&H Cheater Slicks
    • Where in rough shape until I refinished them
  • The back right tire on both sets wheels is cut into from the fenders not being rolled. It doesn’t affect the tires at all.
-
Still have it for sale ?
 

Users who are viewing this thread



Top