2014 Ruby red, Cpr single turbo

onefastmf

Active Member
Established Member
Joined
Jul 31, 2010
Messages
313
Location
Orland park il
Hello all, time has come to part with my beast. 2014 ruby red with 6k miles. I am the original owner. Car has been as fast as 9.1@ 161 mph. Car does not have a cage and the only track I'm allowed on doest really have great prep, so never really had any great 60' times. Car needs a cage and glide to go 7's, i know its easier said than done, but i got the recipe, lol. Anyways i have put together a list of mods, I'm sure ill leave some stuff out, so any questions, just ask. Looking to get 40k obo for the car, both sets of wheels, sct programer, and laptop with tunes, e85 race, e85 street, and 93 street.

[email protected]
seven seven three eight one four nine eight one one


Exterior:
Ruby red with paint correction and sealed and protected with C. quartz



Street wheels:

Chrome sve series 3 wheels for the street with nitto dr's out back

Track wheels:

Drag stars 15x10 out back with drag radial pros and 17x4 up front



Suspension:

Front Q1a double adjustable coil overs
Wilwood 6 piston with 14' drilled and slotted rotors in front
Viking crusader double adjustable shocks
Wilwood 4 piston with 12.5 drilled and slotted rotors in back
Bmr rear drag springs
Bmr anti roll bar
Bmr double adjustable upper and lower control arms
All spherical bushings


Rear end:

Welded axles tubes with brace, Ford motorsports rear cover, 31 spline strange axles
with Detroit locker differential


Fuel system:

Jpc triple fuel system with 3 465 pumps, -10 supply and Y to -8 to rails, -8 return
Injector dynamics 1300's


Electronics:

Msd 2 step
Boost leash controller with co 2
trans brake


Transmission:

Built by power by the hour with billet input shaft and exedy clutches
Performance auto alum. deep pan
Circle D torque converter


Engine:

MMR pro mod 1500 long block
2015 heads with stock cams
10:1 compression
Sleeved block
MMR rear billet support
MMR valve springs
MMR pro sfi harmonic balancer
MMR road runner intake


Turbo kit:

Cpr single turbo with 84mm billet wheel, it spools just fine don't be scared!!


Interior

Corbeau A4 black leather seats
Rear is stock leather
IMG_1193.JPG IMG_1385.JPG
 

Attachments

  • sve.jpg
    sve.jpg
    131.3 KB · Views: 621
Last edited:

onefastmf

Active Member
Established Member
Joined
Jul 31, 2010
Messages
313
Location
Orland park il
Here are some more pics, sometimes is hard to get a good pic because the paint looks like a totally different color in different lighting conditions. let me know if there is any specific pics you would like to see, thanks

IMG_1033.JPG IMG_1037.JPG IMG_1042.JPG IMG_1046.JPG IMG_1047.JPG IMG_1049.JPG IMG_1050.JPG IMG_1051.JPG IMG_1053.JPG
 

onefastmf

Active Member
Established Member
Joined
Jul 31, 2010
Messages
313
Location
Orland park il
Yes, but it’s just kind of wedged between the seat, I take it in and out as needed, for the street I just get press from the compressor housing.
 

onefastmf

Active Member
Established Member
Joined
Jul 31, 2010
Messages
313
Location
Orland park il
I not if people realize how much money is involved with a build of this caliber. I’ve gotten a few low ball offers, and I’m not sure if people understand how much money is involved, so here is just a quick list of some bigger items.

MMR 1500 long block with upgrades 14k
Turbo kit $7200
Fuel system $3500
Transmission $2500
Rear end $1500
Brakes $3500

This short list is about 30k in parts, big item parts, I’m sure people with experience in building a car car will tell you how much the small stuff adds up too. I’d bet if I added everything up I’d be over 50k for sure.
 

onefastmf

Active Member
Established Member
Joined
Jul 31, 2010
Messages
313
Location
Orland park il
Everything works, needs nothing, rear makes a little noise but if radio is at normal level you don’t even notice. Price you have to pay to go fast, anyone could alway put Polly bushings if it was too much. Car drives like any other car besides if shifts harder, but I had it set that way, could always be changed
 

BigButchClarke

New Member
Established Member
Joined
May 23, 2015
Messages
29
Location
Pittsburgh PA
My car is almost identical to yours, turbo, intake, auto and so on. These cars drive perfectly fine with a good tune. You couldn't build this car for anything close to the asking price. You've got a monster of a car. Don't give it away. Good luck with the sale.
 

MG0h3

Well-Known Member
Established Member
Joined
Jul 23, 2014
Messages
13,823
Location
El Paso, TX
Def a good price. If I was looking I'd check this out for sure. Glws


Sent from my iPhone using svtperformance.com
 

A_92Coupe

Member
Established Member
Joined
Jun 30, 2013
Messages
51
Location
San Pedro
Good lookin ride brotha, some people don't understand you gotta pay to play. Best of luck selling that monster, should sell quickly.
 

tones_RS3

I like members members.
Established Member
Premium Member
Joined
Jan 29, 2016
Messages
21,326
Location
MA
Definitely a beastly car! Love the color.
Brett aka @GNBRETT is running a CPR turbo as well I do believe.
GLWS
 

Users who are viewing this thread



Top