• Welcome to SVTPerformance!

3.4 crusher on e85 thinking of nitrous, need help.

Discussion in 'The Blower Bistro' started by Demonio, Oct 20, 2015.

  1. Demonio

    Demonio Active Member Established Member

    Messages:
    1,339
    Joined:
    Mar 28, 2010
    Location:
    Las Vegas NV
    Have a cobra 4.6 with a 3.4 crusher on 24 psi making about 750 rwhp on e85. but now I'm thinking of adding a 100 shot. There is a couple cars at the track faster than me and would like deep into the 9s. I Never used nitrous and been readying about it but don't see much info on crusher kits and e85 plus nitrous. So any advice and what do I need to get the most out of it. Injectors flow 2250cc and fuel is dual 400 pumps..
    Side note my suspension is all stock besides some adjustable strange shocks..
     
  2. Speedboosted

    Speedboosted Active Member Established Member

    Messages:
    2,236
    Joined:
    Nov 3, 2013
    Location:
    PNW
    I would dial in the suspension first honestly. What do your time slips look like? I'd imagine you have a pretty solid trap but I'm sure the ET could use some work with so much power and so little suspension. Once that is dialed it, add some more power
     
  3. Demonio

    Demonio Active Member Established Member

    Messages:
    1,339
    Joined:
    Mar 28, 2010
    Location:
    Las Vegas NV
    R/T... .476
    60" is 1.638
    330....4.422
    1/8.....6.724
    Mph...106.39


    What do you think I can improve to make it faster..
     
    Last edited: Oct 21, 2015
  4. Demonio

    Demonio Active Member Established Member

    Messages:
    1,339
    Joined:
    Mar 28, 2010
    Location:
    Las Vegas NV
    Anyone?
     
  5. BOTTLEFED5

    BOTTLEFED5 booost+spray= me Established Member

    Messages:
    202
    Joined:
    Oct 27, 2011
    Location:
    hanover pk il
    What tire is it on?
     
  6. Demonio

    Demonio Active Member Established Member

    Messages:
    1,339
    Joined:
    Mar 28, 2010
    Location:
    Las Vegas NV
    I'm on Mickey Thompson drag radials. 275/60/15
     
  7. Speedboosted

    Speedboosted Active Member Established Member

    Messages:
    2,236
    Joined:
    Nov 3, 2013
    Location:
    PNW
    Better time than I was expecting, nice. MPH seems a little low though for the power. I went 105 a couple nights ago in a 675 whp gt500..was that run on E85? I'd say based off that slip though, you're ready for the nitrous. Wet shot right?
     
  8. Demonio

    Demonio Active Member Established Member

    Messages:
    1,339
    Joined:
    Mar 28, 2010
    Location:
    Las Vegas NV
    Yeah e85, I was thinking dry. But I do need my 60" to be better not sure where to start
     
  9. BOTTLEFED5

    BOTTLEFED5 booost+spray= me Established Member

    Messages:
    202
    Joined:
    Oct 27, 2011
    Location:
    hanover pk il
    Is it still a 6 speed? If so put it on slicks and a 2 step with some better suspension and with that power level it should '60 in the 1.4s
     
  10. Demonio

    Demonio Active Member Established Member

    Messages:
    1,339
    Joined:
    Mar 28, 2010
    Location:
    Las Vegas NV
    Car is auto
     
  11. Speedboosted

    Speedboosted Active Member Established Member

    Messages:
    2,236
    Joined:
    Nov 3, 2013
    Location:
    PNW
    Well that solves a lot of issues lol. 100 shot is kinda a lot for not having any fuel to go with it. I personally wouldn't go over a 50 dry, maybe 75 but I would rather just do a 100 wet and be done.
     

Share This Page