This is a 331 stroker built by BB&T Racing in Mississippi. It consists of a Mexican block bored .30 over with SRP pistons, Eagle 5.4 rods, and an Eagle crankshaft. The cylinder heads are aluminum Edelbrock Victor Jr. with 2.05 and 1.6 valves,also has a comp cam, comp cam roller lifters, pushrods, and 1.6 comp cam roller rockers. The intake is a trick flow track heat intake with matching trick flow valve covers. The distributor is an MSD Pro Billet with MSD plug wires and NGK spark plugs. The motor also comes with a Vortech V1 s trim supercharger and Mondo BPV. All the brackets, intake and valve covers have been powder coated silver. The motor also comes with solid motor mounts and a new A/C compressor , alternator and power steering pump and all the brackets. The cylinder heads are used as well as the vortech. The motor has not been started since putting all this together. I have decided to buy another car that is set up for a 4.6 32v so I am selling my current setup to built a new motor. The intake comes with a 1 inch spacer but I have lost the upper intake bolts. They can be bought from summit for around $35. I also do not have the bolts for the A/C and PS brackets. This setup should easily make 500-600 rwhp. I would like to get $5000 for the entire setup. Let me know if anyone is interested. I would be interested in possible trades for a 32v engine or a cog drive f1 procharger setup for a 32v.