96 cobra oil level sensor question

96vertsnake

New Member
Established Member
Joined
Feb 23, 2010
Messages
201
Location
Florida
Im going to put a 7 qt oil pan on my 96 Cobra. It has an oil level sensor mounted on the drivers side of the oil pan. I believe this was removed on 98 and later models. Can anyone tell me if this can be turned off in the computer or if it can be eliminated? It doesn't use a typical bung that can be welded onto the pan to mount it. It has a nut welded inside the pan and the sensor threads through and is sealed flat to the outside of the pan.

I can post some pics if necessary.

Thanks,
 

mwolson

Gray beard
Established Member
Joined
Mar 28, 2004
Messages
3,411
Location
San Jose, CA
It isn't run through the PCM. It is just a straight wire to the cluster. Leave it disconnected and it should never light up.

You could repurpose it to be a shift light if you want to...
 

Users who are viewing this thread



Top