- Joined
- Oct 10, 2017
- Messages
- 37
I have a 97 cobra with b heads mmr imrc delete plates aeromotive 14104 96-98 fuel rails and injector dynamics id1050x injectors I’m having
A series of problems.
#1- injector height is off my injectors are about 7mm too short and with rails bolted down the injector is able to pop out of injector bores. Don’t know if it’s a fuel rail bracket height issue or maybe the imrc dele plates were machined too deep? Anyone else have this issue?
#2- I’m having clearance issues trying to plug in the new injectors no matter which way I turn the injector body the connector hits the head and I’m unable to push in the injector connector. Any input of someone running this set up would be appreciated.
A series of problems.
#1- injector height is off my injectors are about 7mm too short and with rails bolted down the injector is able to pop out of injector bores. Don’t know if it’s a fuel rail bracket height issue or maybe the imrc dele plates were machined too deep? Anyone else have this issue?
#2- I’m having clearance issues trying to plug in the new injectors no matter which way I turn the injector body the connector hits the head and I’m unable to push in the injector connector. Any input of someone running this set up would be appreciated.
