98 cobra Vortech 8 rib conversion help

[fordracing1234]

Anybody have any insight on switching over to an 8 rib setup for a Vortech?


Sent from my iPhone using the svtperformance.com mobile app

 

[4vgt]

I just did it on my 97 with a Procharger. These are the parts that I used

Dorman 300-006 - Power steering​

Motorcraft GP720 - Alternator

Dorman 594-112 - Crank​

(2) Dorman 419-612 - Tensioner and idler pulley​

Ford F6TZ-8509-AA, Water Pump​

Denso 471-8121- A/C compressor with 8-rib (my compressor is locked up)​

I made some spacers with aluminum stock for the supercharger bracket, and used washers to space out the idler and tensioner. I had to space mine around .29”. You will also have to grind down the neck of that new alternator pulley to match your factory one and make it sit closer to the alternator.

I found a lot of information from different sites with a google search.

 

[98 Saleen Cobra]

I just built a 10 rib setup for my car..

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

that place is amazing for spacers etc