99 Cobra IRS and 10.5 Fr500 problem???

CobraKalas

New Member
Established Member
Joined
Oct 27, 2003
Messages
1,602
Location
Wheaton, Illinois
Posted on here assuming the 99/01 IRS were similar enough to the 03/04, figured I could get some insight

Just a quick question, looking to buy some replica FR500 wheels over the winter and wondering if the stock IRS will be a problem for 17x10.5 rear wheels as to fitment, I plan on getting a spacer (not sure what size, any info would be appreciated) to get the tires to be just about flush with the fender lip. and I would like everything to bolt on no problems...
 

sawman70

Something Witty!
Established Member
Joined
Jul 26, 2005
Messages
788
Location
Cleveland, OH area
This is a repeat of some older threads but...

You'll have to shave off about half of the head on the top IRS Bolt. I bought two new ones and did this prior to the tire install then had the guys at the garage quickly change them out.

Also, I used a 7/16 spacer.
 

Users who are viewing this thread



Top