Anybody have or know where to find good info on an LS1 T56 swap? (pics)

b dub

4.10's or 4.30's??!!
Established Member
Joined
Apr 13, 2005
Messages
3,280
Location
Twentynine Palms
Anyone know where to go for this. Believe it or not, you can't hardly search any boards with "T56" or "LS1" because the words are too dadgum short.




Tremec verified the model over the phone. For a swap you'd need a new bellhousing, input shaft, tailhousing to move the shifter foward, and adapter plate I think.

S5030695.gif

S5030694.gif

S5030682.gif

S5030691.gif
 

b dub

4.10's or 4.30's??!!
Established Member
Joined
Apr 13, 2005
Messages
3,280
Location
Twentynine Palms
wouldnt it be easier to sell it and buy a cobra spec t56?
Depends on if they are worth about the same. If it's only 250 bucks to swap, I would definitely consider it.



Plus, shipping for this thing would be outrageous. It's freakin heavy!
 

Nvr_Spds

Pushrod > 4v
Established Member
Joined
Jun 25, 2004
Messages
6,303
Location
Chesapeake, Va
Youd probably be better off getting a Cobra trans, and putting in it. The shifter location is wrong, the input shaft is different if im not mistaken, along with other things.
t56dia.jpg
 

b dub

4.10's or 4.30's??!!
Established Member
Joined
Apr 13, 2005
Messages
3,280
Location
Twentynine Palms
Apparently you didn't read it all. I noted the shifter, shaft, etc.




I'm looking for info on how to swap it.....
 

Dusten

Well-Known Member
Established Member
Joined
Jan 20, 2006
Messages
14,926
Location
Conway, Wa
you sell that, and buy the correct one.

this is the like the question, how can i make my 2wd a 4wd? you sell it, and buy one.
 

Nvr_Spds

Pushrod > 4v
Established Member
Joined
Jun 25, 2004
Messages
6,303
Location
Chesapeake, Va
I read it, i was just saying it may be easier to use a Cobra trans. Im dont know too much about taking apart the T56 but with the difference in shift location, i would think its more in depth than just bolting on a different tailhousing.
 

Hmbre97

Eaton powered
Established Member
Joined
Jun 27, 2005
Messages
3,619
Location
Austin, TX
Call me crazy, but I'd like to swap to an LS1 T56 also. It would put our shifter where it should have been to start with and I prefer the hydraulic clutch setup.
 

b dub

4.10's or 4.30's??!!
Established Member
Joined
Apr 13, 2005
Messages
3,280
Location
Twentynine Palms
I read it, i was just saying it may be easier to use a Cobra trans. Im dont know too much about taking apart the T56 but with the difference in shift location, i would think its more in depth than just bolting on a different tailhousing.
I don't have one of those laying around though.


Anyone else?



Maybe buy a broken cobra T56 to swap all the parts over?

Off to the classifieds!
 

Users who are viewing this thread



Top