Been looking into this. Copying designs-the anderson one uses a big rubber or silicon 4 inch elbow. Others use a 90 degree 4 inch tube. All then use a 4 inch 45 degree bend down into the fenderwell.
Looks like it will stick up a bit and the hood will need trimming under it (even the anderson with the rubber tube says that).
It looks like the sharper you can make that 90 degree turn the easier it will be to fit. 6 inch radius 90s are easy to get. summit sells a 5 inch radius in aluminized steel. However for basically the same price you can get polished aluminum 6 inch radius. I am leaning that way. Just wondering how much I will have to persuade the underside of the pipe if I cut the hood.
Erich
Looks like it will stick up a bit and the hood will need trimming under it (even the anderson with the rubber tube says that).
It looks like the sharper you can make that 90 degree turn the easier it will be to fit. 6 inch radius 90s are easy to get. summit sells a 5 inch radius in aluminized steel. However for basically the same price you can get polished aluminum 6 inch radius. I am leaning that way. Just wondering how much I will have to persuade the underside of the pipe if I cut the hood.
Erich