anyone make a boost & fuel pressure gauge all in one?

[shelbyman1]

dont want the car all cluttered with gauges, does anyone make a boost and fuel pressure gauge all in one?

 

[zporta]

Aeroforce gauges display 2 parameters on each gauges. They can also be set to scan up to 8 parameters on each gauge

If you don't want clutter a zPod is a nice way to have a clean gauge install. Keep the pillar and dash clean of gauges

 

[shelbyman1]

looked at those, can they be set up to display BOOST and fuel pressure?

 

[zporta]

Yes, but depending on the year you will need sensors to read boost, the obd2 reads fuel press. Just not oil press and air fuel in 07-09

 

[Goose17]

I have an 11 with the Aeroforce gauge. None of the GT500's will display boost on your gauge without an added boost sensor. I just got my sensor installed a couple weeks ago. You tap off the passenger side fuel rail - on the fuel pressure sensor. As for fuel pressure... I don't think the Aerforce gauge will read that from the OBD-II port if I'm not mistaken. I think you will need a sensor again.

 

[2004Droptop]

I run Aeroforce and it does both but you will have to upgrade the sender to read above 15lbs of boost. On a 2004 it will read fuel psi from obd2

 

[bossnova3]

Zpod FWIW.... Don't have one but eventually great looking setup.
Highly recommended

Ed

 

[AlanSVT]

Aero force does fuel pressure with out add ons my 2010.
Boost and oil senders are needed for the gauge to work

 

[Diehard57]

Hello,

Does anyone know if these (zPods) are still made or there is someone willing to sell one or make them (print them for instance)? If anyone happens to know where I can pick one or two up I'd be greatful.

Best,
JM

 

[PM-Performance]

Ngauge is where it’s at!
Just need a sensor for fuel pressure. Same with any gauge .
But you can monitor like 150 diff values