• Welcome to SVTPerformance!

Anyone using Tweecer or Moates programmers?

Discussion in 'Cobra R's' started by Bill Anderson, Feb 28, 2011.

  1. Bill Anderson

    Bill Anderson Member Established Member

    Messages:
    275
    Joined:
    Feb 20, 2005
    Location:
    atlanta
    Anyone using Tweecer or Moates programmers?
     
  2. Ruslow

    Ruslow Member Established Member

    Messages:
    434
    Joined:
    Dec 16, 2000
    Location:
    in the moonshine state!
    yes using the moates Quarterhorse and BE.Works great can change things that unless you are a SCT tuner you would not have the ablities using the Pro package SCT offers and with BE you can data log which is not poss with the SCT.Get a wide band sensor and the above stuff and you can do anything you want.i would suggest using an stock style computer instead of the factory R one so you can still have it if you ever go stock again.Stan
     
  3. Bill Anderson

    Bill Anderson Member Established Member

    Messages:
    275
    Joined:
    Feb 20, 2005
    Location:
    atlanta
    Hi Thanks for the feedback, actually have a spare processor. will give it a shot, also heard good things about the mongoose obdII flash cable using it with BE as well. Have got both coming, sure will be glad to get away from the handheld flash devices..
     
  4. Ruslow

    Ruslow Member Established Member

    Messages:
    434
    Joined:
    Dec 16, 2000
    Location:
    in the moonshine state!
    So you are doing a 00R?If so then any of them will work.But burning a chip is faster[and safer] than a flash tool.You can actually use any computer that uses the same strat. ie CBAZA is used for T4M0,J4J1,ZAO etc.Think of the strat as an operating system so any of the same ones will work.YOu can download the cal and put it on the chip even if the computer is a different cal.Stan
     

Share This Page