auto-xer's with gears...

[cobraetti]

just got the 4:10's installed and it is a nice improvement. still feel I could go fatser but seem to get loose or spin out......have FSC's bushing upgrades, eibach springs...seem to have a good bit of body flop?......as far as tire pressure whats the opinion with my set-up

 

[Goindeafonmtx]

just got the 4:10's installed and it is a nice improvement. still feel I could go fatser but seem to get loose or spin out......have FSC's bushing upgrades, eibach springs...seem to have a good bit of body flop?......as far as tire pressure whats the opinion with my set-up

Depends on way to many factors to list here. You just need to chalk your tires and go from there. If you have too much roll over, add psi. If you aren't utilizing all of the tires tread, decrease the psi. I tend to run around 29-30 psi on my RE-01R tires.

 

[Conechaser]

What tires? How worn is your diff? Stock sway bars? What class are you running? Maybe a stickier tire is in order?

 

[cobraetti]

i HAVE RIKEN RAPTORS, DIFF. WAS FRESHED UP 1 MONTH AGO AND F STOCK

 

[Conechaser]

i HAVE RIKEN RAPTORS, DIFF. WAS FRESHED UP 1 MONTH AGO AND F STOCK

You're not in F Stock with 4.10's and Eibach springs. Welcome to C Prepared or Street Modified.