Blowfish Tranny Bracket for GT500

[HooperWest]

https://www.blowfishracing.com/driv...gt500-mustang-tr6060-shifter-support-kit.html


This looks like a robust piece that has some thought put in to it.

Not sure if Blowfish is a sponsor or a contributor here, but it would be helpful if they, or someone "in the know", could explain how this will work and whether it will improve the functionality of the Ford Racing KR Shifter assembly too or only the Stocker?

 

[redfiredroptop]

Details on different year stock, FRPP, and KR shifters are here: http://www.svtperformance.com/forums/showthread.php?953804-A-tale-of-two-shifters . Since the shift support kit works with 07-14 shifters, it would have to work with a KR shifter. However for this kind of money you could go with an MGW shifter.

 

[Snoopy49]

Did they ever post a picture of the finished production part or are they still trying to sell parts using only a CAD drawing?

 

[Snoopy49]

Has anyone tried one of these?

2007-2014 GT500 Mustang TR6060 Shifter Support Kit

 

[finally03gt]

Well, I just installed billet front bushings in the shifter, and billet bushings between the stick and shifter, with a KR bushing in the back.
I see two large rubber mounts at the crossmember, 2 more where the rear mount attaches to the unit. Still have soft bushings up front and between the stick and shifter. I'm not sure I truly understand the advantage of this piece? I don't imagine this being much more solid, and I"m only about $75 into my stuff. A drive shaft loop is $100, so for half the price......

 

[SID297]

Unfortunately, you're still stuck with the wasted motion of the stock pendulum style linkage.