Boost/Vacuum Line size and material Help

[Oiljunkie]

Doing a 4V and Eaton swap on my 2000 GT and need a lil help on the vacuum and boost lines.

I need to purchase some material to route everything properly but don't know the size of hose i need or connector size

any help would be appreciated

Thanks Jay:beer:

 

[BadAzztt]

The factory connections on the back of the blower will be 5/16ths or 3/8 depending on which one. Most of the smaller connections, FRPS, Boost actuator, etc are 1/4". You can get reducers to adapt sizes depending on what you're connecting. You will need the reducer or a factory style line to connect to the Evap stuff.

 

[Oiljunkie]

awesome thanks a tons

 

[FiveOhJoe]

I used 3/16" in place of 1/4" to get a snug fit on everything. I used silicone tubing from eBay.

/end relatively useless post lol