Brembo bleeding sequence

SUPERVENOM03

Member
Established Member
Joined
Apr 9, 2012
Messages
61
Location
Rock Springs GA
Just a heads up to all.
I just did my first brembo brake job and did a full system fluid flush while I was at it. I bleed I the classic furthest to nearest order. When I took it for a test drive there was air in the system and the brakes were mushy. I did some reading and discovered the proper sequence to be RF, LR, LF, RR. Inner then outer on the front calipers. After the second bleeding they work perfectly
 

bdcardinal

I Spend car money on guns
Established Member
Joined
Jul 14, 2004
Messages
2,158
Location
Santa Barbara, California, United States
FWIW the FSM disagrees with you. It indicates the proper order is RR, LF, RF inner, RF outer, LF inner, and LF outer. It also says to cycle the parking brake at least 5 times before starting the sequence.
 

Users who are viewing this thread



Top