Carbon fiber/titanium application?
Repairing my splitter.
There will be a 6"x6" sheet of titanium on the top of 1/2" of carbon fiber, and one 6"x6" sheet of titanium on the bottom. There will be two bolts that enter from the bottom and are capped through a bracket on the top. Goal is to give more surface area to the pressure to keep the bolts from coming back through the carbon fiber.
Why not take the titanium sheet and then get new carbon fiber mat before it's been impregnated with resin and wrap the titanium then impregnate and vacuum bag it? Could be a fun project.