CCW Classics

kallen

Member
Established Member
Joined
Jun 15, 2017
Messages
66
Location
Berwick, ME
CCW Classics, purchased new in March of 2019. Came off my 03 Cobra.
18x9.5 front 6.25 backspacing
18x11 rear 6.75 backspacing
Excellent fitment for IRS 03/04 Cobra
Matte black centers
Gloss black lips and inner barrels
NOT "big brake cut"
One rear wheel has scratch as shown in picture
M/T ET Street S/S 305/35/R18 rear tires
M/T Street Comp 275/35/R18 front
Wheels/tires have less than 2500 miles
Asking $3800
Looking to sell local in New England, prefer not to ship at this time.
Located in Southern Maine, roughly 30 minutes from Portsmouth, NH.
1009201637.jpeg
1004201157.jpeg
1004201158.jpeg
1004201158a.jpeg
1004201158b.jpeg
1004201200b.jpeg
1009201642a.jpeg
1004201158d.jpeg
1004201158c.jpeg
1004201202.jpeg


Sent from my LM-G710VM using the svtperformance.com mobile app
 

68gtscode

Well-Known Member
Established Member
Joined
Apr 4, 2008
Messages
1,140
Location
Cleveland, OH
I don’t even have a car these would fit but I still want to buy them!! I bought a set of very similar CCWs but they went with my 03 when I sold it years ago... one of my biggest regrets in life! Someone is going to get awesome wheels- good luck on the sale!
 

68gtscode

Well-Known Member
Established Member
Joined
Apr 4, 2008
Messages
1,140
Location
Cleveland, OH
Will these clear the ford racing Brembo calipers ?
Not sure, I have stock cobra brakes.

The best way to determine fitment is by printing cross-section blueprints 1:1 of your particular Brembos and using the procedure outlined in this article (this website also has many Brembo blueprints). I did this recently when selling a set of wheels to a guy with six piston Brembos... The wheel manufacturer told me they didn't think the wheels would fit, but this method proved them wrong. For what it's worth, I asked CCW when ordering my wheels many years ago- I remember they told me Brembo calipers stick out fairly far, and they recommended Wilwoods for this reason. That said, if you're seriously interested in these wheels, work with the seller to determine for sure. Good luck!

How to Measure Your Wheel for Proper Brake Clearance | Race Technologies | Brembo Official Partner
 

1320goat

Active Member
Established Member
Joined
Apr 25, 2013
Messages
167
Location
Pittsburgh
Wish they weren't black
Tear them down and have them refininished. You could honestly leave the inner barrel black and just refinish the outer lip and face. It's an option if you're saving a bit on these ones over a new set.
 

11sec335i

New Member
Established Member
Joined
Apr 2, 2018
Messages
28
Location
Florida
Well, if you would like to put them in boxes and ship them. I'd take them. You could even have them put on a pallet and shipped.
 

Users who are viewing this thread



Top