• Welcome to SVTPerformance!

Central Florida - Sleeved 2nd gen longblock

Discussion in 'Engine/Drivetrain' started by Adaraas, Jun 1, 2019.

  1. Adaraas

    Adaraas New Member Established Member

    Messages:
    16
    Joined:
    Oct 9, 2014
    Location:
    Florida
    Original 2016 Block. Sleeved with stock bore pistons Stepped sleeve. 11:1 Compression
    Currently has about 5k Miles on it.
    Callies Rods, Diamond Pistons, OEM Crank. Trick Flow valve springs. full arp catalog main studs/sidebolts/rod bolts/head studs.
    Has King rod bearings, OEM main bearings. ATI Balancer.
    Has a 2018 GT manifold
    Included is my breather setup.

    I'll include my Fore stage 4 Rails, but only the rails as I'm reusing the rest.

    Oil changed every 3k Miles with 10w50 castrol

    Built by [email protected] Intergration in tampa.

    Located in Central florida, but I'll drive up to 3 hours from Brooksville area to meet you/drop it off.
    Asking 9k For complete motor/ECU. Just drop in, add your injectors and go. Alternatively Make me a reasonable offer.

    I can also include My transmission and Circle D 3C Converter for 10.5k or again make me an offer. thanks

    I'm not sure if the ECU will work or not. I know it doesnt work when doing coyote swaps in older cars cause of the BCM, but maybe it works in 2015 cars? Either way I'll include it as I have no need for it.

    I can have the motor out of the car in about 3 hours. let me know, thanks. 20190530_172542-1-jpg.jpg sleeved-1-jpg.jpg rotating_assembly-1-jpg.jpg mains-1-jpg.jpg going_together-1-jpg.jpg
     
  2. opm

    opm Member Established Member

    Messages:
    104
    Joined:
    May 23, 2010
    Location:
    fl
    Pm me a price for just the trans/converter
     

Share This Page