• Welcome to SVTPerformance!

CJ intake on 2015

Discussion in '5.0L Coyote V8 Engine Modification/Discussion' started by tonylittell, May 18, 2015.

  1. RSKtakR

    RSKtakR Member Established Member

    Messages:
    865
    Joined:
    Sep 26, 2007
    Location:
    Raymore, MO
    Were are the CMCV's on the 15's? are they in the intake or a separate part that is under our intake?
     
  2. tonylittell

    tonylittell Texas sized Balls! Established Member

    Messages:
    459
    Joined:
    Apr 5, 2012
    Location:
    Virginia
    pics are to big and I don't know how to re size.....

    boss intake is 9.75 inches tall, so is the cj intake
    boss intake is 21.5 long the cj is 22.5 long.... the extra inch is on back passenger side of intake and there is a cut in the firewall right where the intake bulge is, almost like it was made to fit a cj intake.

    I will know in a couple weeks, but I believe using upr engine mounts on lowest setting and removing headliner and we are good
     
  3. SID297

    SID297 OWNER/ADMIN Staff Member Administrator

    Messages:
    48,838
    Joined:
    Mar 27, 2003
    Location:
    Myrtle Beach, SC
    They are integrated in the intake manifold.
     
  4. bambinov8

    bambinov8 600WHP LOL Established Member

    Messages:
    2,758
    Joined:
    Feb 10, 2008
    Location:
    SOUTH FLORIDA
    Subcribed
     
  5. KonaFifty

    KonaFifty Member Established Member

    Messages:
    528
    Joined:
    Feb 27, 2013
    Location:
    Sac
    that is weird that you got the same height measurement as the boss because with the 11-14, with a boss manifold, you can run the boss strut tower bar, but when you swap to a cj manifold, you would need spacers or motor mounts to fit the boss strut tower bar...
     
  6. tonylittell

    tonylittell Texas sized Balls! Established Member

    Messages:
    459
    Joined:
    Apr 5, 2012
    Location:
    Virginia
    The reason you need spacers for the cj intake is because the boss intake is cut and grooved where the strut bar goes across. if you give me a number to text I can send you pics that will help show you what im talking about
     
  7. tonylittell

    tonylittell Texas sized Balls! Established Member

    Messages:
    459
    Joined:
    Apr 5, 2012
    Location:
    Virginia
    UPDATE

    Parts ordered. Just waiting on the parts to arrive and the tuner to get the car in for tuning

    Should be 3rd or 4th week of june
     
  8. RSKtakR

    RSKtakR Member Established Member

    Messages:
    865
    Joined:
    Sep 26, 2007
    Location:
    Raymore, MO
    Did you go ahead and order the CJ manifold?? I want to run the Boss manifold but don't have specifics on it other than just dropping the motor 1/2"-3/4". And if the cmcv deletes are in the stock 2015 manifold the nI wonder if that will mess anything else up?
     
  9. tonylittell

    tonylittell Texas sized Balls! Established Member

    Messages:
    459
    Joined:
    Apr 5, 2012
    Location:
    Virginia
    Yes I ordered the cj . Motor mounts arrived today. Stop worrying about the parts in the manifold. You just need to tune the car just like any other year coyote engine. Go order your boss intake! :)
     
  10. RSKtakR

    RSKtakR Member Established Member

    Messages:
    865
    Joined:
    Sep 26, 2007
    Location:
    Raymore, MO
    its probably safe to say that I wont be able to use the stock PP strut tower brace if I put the Boss manifold on I'm sure.. Daaaammmit.
     
  11. tonylittell

    tonylittell Texas sized Balls! Established Member

    Messages:
    459
    Joined:
    Apr 5, 2012
    Location:
    Virginia
    replace it with the one that comes on the 20" wheel package cars.... but to be truthfull you don't need a strut tower bar unless its heavily road coursed and then its marginal..... I have a 4 second drag car and don't have one on it.
     
  12. el jefe 302

    el jefe 302 Making all kinds of gainz Established Member

    Messages:
    1,027
    Joined:
    Nov 30, 2012
    Location:
    United States
    To check that theory unbolt one side of the brace and slap a Gopro under the hood, I bet it flexes more then Ronnie Coleman.
     
  13. tonylittell

    tonylittell Texas sized Balls! Established Member

    Messages:
    459
    Joined:
    Apr 5, 2012
    Location:
    Virginia
    I check that theory every weekend with my 2000 hp outlaw drag radial car. tested it with my 99 that went low 5s and tested with my 02 cobra

    look at the drag strip and you will see no REAL drag cars with strut tower bars...... again, unless its a road course car it isn't worth any performance gains
     
  14. tonylittell

    tonylittell Texas sized Balls! Established Member

    Messages:
    459
    Joined:
    Apr 5, 2012
    Location:
    Virginia
    Ford has tested the theory over and over as well since the cobrajet cars don't have strut tower bars either....
     
  15. Anthony K

    Anthony K New Member Established Member

    Messages:
    371
    Joined:
    Sep 29, 2006
    Location:
    S.E. Michigan
    This is almost too stupid to respond too, but here it goes.......

    Your 4 sec drag car doesn't need a strut tower brace because it has a full 25.5 cage.

    A unibody car with no cage will benefit a lot from one.

    What's your real name mr 4.00 8th mile man?

    Bullshit is easy to check,

    One side, you actually have a odr car, cool! Bada$$, but your too dumb to see the difference in a 25.5 car and a 10sec no cage, no frame connector car??????

    2nd side. You don't have a 4sec car and your talking out your @$$

    Either way I'm fine. But damn.
     
  16. Anthony K

    Anthony K New Member Established Member

    Messages:
    371
    Joined:
    Sep 29, 2006
    Location:
    S.E. Michigan
    The cj's have bars in them.

    At first team z now Watson, and I'll say neither tested strut tower bars at all. Knowing Dave personally and knowing a bunch of guys at Watson, including their head tuner Kim
     
  17. tonylittell

    tonylittell Texas sized Balls! Established Member

    Messages:
    459
    Joined:
    Apr 5, 2012
    Location:
    Virginia
    under hood.jpg I posted 3 different cars I owned not just the odr car.... I don't class race, I grudge race but my name is in the title..... here is also my forsale ad in racing junk under same name for said odr car http://www.racingjunk.com/Complete-Race-Cars/182500497/91-Back-Half-Mustang-Notch-Roller.html

    again, go to the drag strip and look under the hoods of any real race car and nobody runs strut bars other than people that have been tricked into wasting their money..... now for a road course that's another story like I said before


    but my odr car has no bars throught the fire wall other that two that weld to the back of the shock tower. can post pics of that as well
     
    Last edited: May 30, 2015
  18. tonylittell

    tonylittell Texas sized Balls! Established Member

    Messages:
    459
    Joined:
    Apr 5, 2012
    Location:
    Virginia
    99 launch.jpg new engine.jpg 91.jpg
     
  19. tonylittell

    tonylittell Texas sized Balls! Established Member

    Messages:
    459
    Joined:
    Apr 5, 2012
    Location:
    Virginia
    intake.jpg

    here is my 2 stage fogger that Steve Johnson just finished for the engine in the odr car.... the engine pic is the odr engine and the blue car is my odr car
     
  20. tonylittell

    tonylittell Texas sized Balls! Established Member

    Messages:
    459
    Joined:
    Apr 5, 2012
    Location:
    Virginia
    cobrajet car.jpg

    cj car.... no bar.....


    boss cars = bars




    but who cares really. lets get back on topic please
     

Share This Page