Greetings Fellow Stangers:
Congratulations. You've just discovered the finest Mustang Cobra IRS bushing kit available on the market today.
I can tell you two things. #1 If you are changing your car from completely stock to this set-up, you will be astounded at the difference this kit makes. #2 If you've purchased kits from our competitors and were disappointed in them, you will not be disappointed in our kit. We guarantee it.
THE IRS BUSHING SET
Here is a photo of the Delrin Upper Control Arm Bushing set FT 1000 with the inner sleeves showing the Hardcoat anti-wear coating.
The spiral grooves distribute the grease to the inner sleeve.
With proper lubrication you should not be able to wear these out! :-D
This is the newly redesigned Delrin Lower Control Arm Bushing set FT 1100 complete with Hardcoated aluminum inner sleeves and stainless steel shimming washers:
This is the UHMW subframe bushing set FT 1500.
Here are the new black anodized aluminum FRONT diff mounts FT 1200 that compensate for severe mounting angles:
And the rear Delrin diff support mount FT 1300:
This is the new combined grease fitting kit FT 1700. It consists of a drill, a tap and eight grease fittings.
Here is a photo of the 9/16" grade 8 front sub-frame bolts and grade 8 nylock nuts FT 1600:
Here is the breakdown on the kit:
FT 1200 Aluminum Front diff supports w/Aluminum shimming washers to set pinion angle
FT 1300 Delrin Rear Diff support
FT 1500 Complete UHMW IRS Cradle support set
FT 1000 Upper control arm bushings by themselves
FT 1100 Lower control arm bushings by themselves
FT 1700 Combined UCA & LCA grease fitting kit
FT 1600 a pair for 9/16" Grade 8 bolts with nylock nuts and flat washers for the front subframe mounts
FT 5000 for all of the above items.
If you want the Delrin isolated rear diff lowering mount included in your kit, you'd need to order our FT 5001 kit. This is the FT 1401 lowering mount:
This lowering mount works with the new and improved Ford Racing rear cover we now handle. The part number is FT 1350:
Here is a photo showing our Delrin isolated rear lowering mount on the Ford Racing diff cover:
Additional optional items available:
FT 2100 OEM bushing removal tools, partial refund upon return
FT 1860 Deluxe bumpsteer/upgraded toe link set
FT 1900 adjustable sway bar end link kit
FT 2000 is the four piece machinist's angle finder set
Pic of removal tools FT 2100:
These removal tools will make this job INFINITELY easier! It is HIGHLY recommended to get the tools.
Our Deluxe bumpsteer and upgraded toe link kit, FT 1860 replaces all of the parts in the OEM toe link. Bumpsteer adjustment can be made at both the inner and outer connection points:
Here is a photo of the four piece machinist angle finder to save you the hassle of tracking one down yourself:
Here is a photo of the adjustable sway bar end links:
Here are some additional informational videos that may help you in the disassembly of your IRS.
SN-95_Videos
Here are some installation photos and tips:
Installation Photos and Tips
Full Tilt Boogie Racing home page
[email protected]
Bruce
PS I don't always have time to check replies to this thread on a constant basis, so if you're hot for parts or an answer, just drop me a PM. (no visitor messages PLEASE!!)
Last updated 5-23-22
Congratulations. You've just discovered the finest Mustang Cobra IRS bushing kit available on the market today.
I can tell you two things. #1 If you are changing your car from completely stock to this set-up, you will be astounded at the difference this kit makes. #2 If you've purchased kits from our competitors and were disappointed in them, you will not be disappointed in our kit. We guarantee it.
THE IRS BUSHING SET
Here is a photo of the Delrin Upper Control Arm Bushing set FT 1000 with the inner sleeves showing the Hardcoat anti-wear coating.
The spiral grooves distribute the grease to the inner sleeve.
With proper lubrication you should not be able to wear these out! :-D
This is the newly redesigned Delrin Lower Control Arm Bushing set FT 1100 complete with Hardcoated aluminum inner sleeves and stainless steel shimming washers:
This is the UHMW subframe bushing set FT 1500.
Here are the new black anodized aluminum FRONT diff mounts FT 1200 that compensate for severe mounting angles:
And the rear Delrin diff support mount FT 1300:
This is the new combined grease fitting kit FT 1700. It consists of a drill, a tap and eight grease fittings.
Here is a photo of the 9/16" grade 8 front sub-frame bolts and grade 8 nylock nuts FT 1600:
Here is the breakdown on the kit:
FT 1200 Aluminum Front diff supports w/Aluminum shimming washers to set pinion angle
FT 1300 Delrin Rear Diff support
FT 1500 Complete UHMW IRS Cradle support set
FT 1000 Upper control arm bushings by themselves
FT 1100 Lower control arm bushings by themselves
FT 1700 Combined UCA & LCA grease fitting kit
FT 1600 a pair for 9/16" Grade 8 bolts with nylock nuts and flat washers for the front subframe mounts
FT 5000 for all of the above items.
If you want the Delrin isolated rear diff lowering mount included in your kit, you'd need to order our FT 5001 kit. This is the FT 1401 lowering mount:
This lowering mount works with the new and improved Ford Racing rear cover we now handle. The part number is FT 1350:
Here is a photo showing our Delrin isolated rear lowering mount on the Ford Racing diff cover:
Additional optional items available:
FT 2100 OEM bushing removal tools, partial refund upon return
FT 1860 Deluxe bumpsteer/upgraded toe link set
FT 1900 adjustable sway bar end link kit
FT 2000 is the four piece machinist's angle finder set
Pic of removal tools FT 2100:
These removal tools will make this job INFINITELY easier! It is HIGHLY recommended to get the tools.
Our Deluxe bumpsteer and upgraded toe link kit, FT 1860 replaces all of the parts in the OEM toe link. Bumpsteer adjustment can be made at both the inner and outer connection points:
Here is a photo of the four piece machinist angle finder to save you the hassle of tracking one down yourself:
Here is a photo of the adjustable sway bar end links:
Here are some additional informational videos that may help you in the disassembly of your IRS.
SN-95_Videos
Here are some installation photos and tips:
Installation Photos and Tips
Full Tilt Boogie Racing home page
[email protected]
Bruce
PS I don't always have time to check replies to this thread on a constant basis, so if you're hot for parts or an answer, just drop me a PM. (no visitor messages PLEASE!!)
Last updated 5-23-22
Last edited:
