Complete Vortech V7 JT-B Kit from Beefcake Racing with upgrades. No Tuner Included.
• Vortech V7 JT-B Trim Supercharger Unit
• Powder coated Aluminum Coolant Overflow Tank
• 8-Rib Upgrade Kit
• DW #95 1000cc injectors (7 months old)
• Vortech Programmable BAP
• 3.60", 3.47" and 3.15" 8-rib pulleys included
• ATI 20% Super Damper Overdrive Harmonic Balancer
• Air inlet assembly includes:
• High-flow roto-molded duct. Mates to OEM airbox and some aftermarket “CAI” MAF/inlet assemblies
• Silicone sleeves and reducers
• Stainless steel T-clamps
• PCV and breather hose provisions for both automatic and manual transmission applications
• Replacement engine coolant pipe and hose assemblies
• Engine coolant reservoir replacement assembly
• Billet aluminum and steel supercharger mounting bracket assembly includes idlers, drive belt and all hardware
• JPC Block off plate with Tial Q Blowoff Valve
• Discharge components include:
• Welded air/air charge cooler. 24”L x 13”T x 3.5” cooler core.
• Mandrel bent 3” aluminum charge tubes for high flow and minimal weight
• Stainless steel T-clamps and Silicone Sleeves
• 98mm I.D. MAF housing configured for “blow-through” use
• Small Ding in top of Intercooler, does not affect perfomance at all, ZERO Leaks
• JLT Carbon Fiber Blow-through intake
• No tuner included
Kit is amazing. Zero play in Supercharger.
Bought it off another member in 2018, installed and ran for about 7 months before blowing a headgasket. Never had it on the dyno but it makes stupid power. I went with a tune from Lund Racing and it ran great. Since I live in Commiefornia I'm taking it off and don't feel like dealing with the illegal smog or registering it out in another state.
Looking for $6000
Located in Orange County California, Pickup or Will Ship, cost varies by location.
• Vortech V7 JT-B Trim Supercharger Unit
• Powder coated Aluminum Coolant Overflow Tank
• 8-Rib Upgrade Kit
• DW #95 1000cc injectors (7 months old)
• Vortech Programmable BAP
• 3.60", 3.47" and 3.15" 8-rib pulleys included
• ATI 20% Super Damper Overdrive Harmonic Balancer
• Air inlet assembly includes:
• High-flow roto-molded duct. Mates to OEM airbox and some aftermarket “CAI” MAF/inlet assemblies
• Silicone sleeves and reducers
• Stainless steel T-clamps
• PCV and breather hose provisions for both automatic and manual transmission applications
• Replacement engine coolant pipe and hose assemblies
• Engine coolant reservoir replacement assembly
• Billet aluminum and steel supercharger mounting bracket assembly includes idlers, drive belt and all hardware
• JPC Block off plate with Tial Q Blowoff Valve
• Discharge components include:
• Welded air/air charge cooler. 24”L x 13”T x 3.5” cooler core.
• Mandrel bent 3” aluminum charge tubes for high flow and minimal weight
• Stainless steel T-clamps and Silicone Sleeves
• 98mm I.D. MAF housing configured for “blow-through” use
• Small Ding in top of Intercooler, does not affect perfomance at all, ZERO Leaks
• JLT Carbon Fiber Blow-through intake
• No tuner included
Kit is amazing. Zero play in Supercharger.
Bought it off another member in 2018, installed and ran for about 7 months before blowing a headgasket. Never had it on the dyno but it makes stupid power. I went with a tune from Lund Racing and it ran great. Since I live in Commiefornia I'm taking it off and don't feel like dealing with the illegal smog or registering it out in another state.
Looking for $6000
Located in Orange County California, Pickup or Will Ship, cost varies by location.
