Cruise Control stopped working after I honked the horn hard. I checked all the fuses in the engine bay and under the dash. All were good. Anyone else had this issue?
I would pull the airbag and check the connections on the clock spring if you hit the horn/airbag physically that hard. I've never experienced a CC issue on the Cobra. If you have access to the shop manual I also think you can enter a test mode where you can depress the switches one at a time and get confirmation they are being seen as an input through the cruise indicator on the dash. Works on other FLM products so it should apply to the Terminator. SV
Was it an emergency braking situation? There is a switch or connection or something at the pedals where the cruise control connects. Mine is not working because I had to play with the pedals when doing a blower swap. Could've knocked it loose if you were slamming on the brakes after leaning on the horn for some turd burglar. It's a stretch but a quick check.
There is a switch on left side of brake pedal..you manually reset it.. Very easy..un hook rod from brake pedal.. Push rod into switch..it will click.. Reconnect to brake pedal with not pulling on rod..move brake pedal to rod.. Thats it Adding..ive replied in many threads sections of the manual.. Alot in acrobat pdf stye..than copy and paste.. Use the on site search. Cruise control testing Or click on my name..you can search all my replys
