Custom Twin Turbo 5.0 F150 Project

[Black n Blown]

Forgive me I posted this in the wrong section, I wasn't sure where to post it.

A small introduction about me, I own a custom fabrication shop in Stuart FL. I specialize in fabrication and I do full race car builds/ street car builds or basically whatever my customers want.

I'm currently working on a 2014 F150 4x4 we put a 5.0 Alumintaor Ford racing motor and I'm building custom headers for a custom TwinTurbo set up.


Headers are hand made with Stainless 304, 1.75" Primary's, 1/2" Thick CNC machined flanges, 2.5" Stainless V band Collectors.


Here are a couple of pics, and if you would like to see more of my work you can look me up on Instagram under GearheadFabrications.

 

[Black n Blown]

 

[Black n Blown]

 

[mechanicboy]

Very nice. I think this is the perfect section for this build. The quality looks very good on that exhaust work.

 

[Black n Blown]

Thanks!

 

[lsittingbull]

Wow. This is going to be nice......

 

[Black n Blown]

Thanks the goal is 750hp to the wheels and we should be hitting the rollers in the next few weeks

 

[BSB318]

Thanks the goal is 750hp to the wheels and we should be hitting the rollers in the next few weeks

1st off , VERY impressed with your work.

With this kind of power (750hp !!!!) do you think the 4x4 tranfer case or transmission will hold up ?

I just locked up a trade deal (my 2013 Mustang GT premium) for a new 2014 leftover 5.0 stx sport 4x4 with a regular cab , short bed , 3.55 limited slip rear set up.

I plan on using a roush TVS set up in the future for my f150 so what would be safe from a power standpoint for my 4wd drive train ?

That coyote engine rocks and I just had to have in a f150.

 

[UWISHU1]

sub'd

 

[Black n Blown]

Thanks for kind words.

We upgraded the trans to a circle D unit with billet internal as well as the converter. Not sure how the transfer case is going to hold up. This truck was running a TVS for 55k miles till it kicked a rod out. (I have the blower for sale for $3500)

Some more progress on the exhaust. Very tight fit, but you have to take your time.

 

[Troponin]

Awesome!! I am working on a Supercharged 2014 F150 as well. Sure as hell won't be the beast that yours will be, but it's still fun!

I am curious, what wheel, tire and suspension set up are you going with? This is where I am stuck. I am probably only going to be in the 500whp range when I am done, because it's my DD and am trying to go conservative with it.

 

[Black n Blown]

This is my clients work truck
Stock 22s stock suspension with long traction bars.

 

[BSB318]

What kind of power was that engine making before the rod went ?

 

[Black n Blown]

510 wheel

 

[BSB318]

At 510 wheel horsepower what kind of times was the truck running ?

 

[Black n Blown]

This is his work truck. I don't believe it has been tracked.

 

[TVSF150FX4]

1st off , VERY impressed with your work.

With this kind of power (750hp !!!!) do you think the 4x4 tranfer case or transmission will hold up ?

I just locked up a trade deal (my 2013 Mustang GT premium) for a new 2014 leftover 5.0 stx sport 4x4 with a regular cab , short bed , 3.55 limited slip rear set up.


I've put down over 700rwhp with a TVS and aluminator with over 100 4x4 launches at the track the transfer case has never been a problem. Trans is upgrade and circle D over 100K miles

 

[Black n Blown]

Well I found an old time slip right on the dash of the truck and it appears he has run a 12.87 with the blower setup.

 

[Zemedici]

oh man that's awesome. Cannot wait to get my truck and start working on it.

 

[Black n Blown]

I would love to make some single/twin kits for the F150. If anyone is in South FL and is insterested in dropping your truck off to build a kit off of let me know.

This customer pushed his deadline up so unfortunatly I can't make another one using this truck due to time crunch.