Dasan's work paying off!

CPRsm

Active Member
Joined
Feb 3, 2009
Messages
4,400
Location
San Diego, Ca
First pass was an 8.9 followed by an 8.709. 3rd pass w the new combo, and boost is ramping in a little faster now. Pretty basic combo. Ported heads, sleeved block, stock cams and ecu. Off the shelf CPR kit. 76mm w the A/W intercooler. Congrats Dasan! He expects 170 w this turbo and a small change that will keep the rpm off the limiter at the stripe.


image_1.jpg
 

CPRsm

Active Member
Joined
Feb 3, 2009
Messages
4,400
Location
San Diego, Ca
Yeah. Just passed another that runs 8.6's in about 4500-5000 DA.
Going to send him some new kung fu we've been testing out. Adam @ Rev auto is going to raise the limiter and bottoms 8's shouldn't be far out. Then we'll put on the "Simple Jack" turbo lol.
 

scott_0

Well-Known Member
Established Member
Joined
Jul 30, 2011
Messages
4,337
Location
Pa
get it Dasan!!!!! Adam at Rev Auto is a great tuner
 

BMR Tech

Active Member
Joined
Jun 15, 2011
Messages
4,454
Location
FL
Looks boring from the outside. Scrappy Coco would call it silly smooth! Lmao

I spoke with D earlier about it. He spent a good amount of time going over it, and setting it up to make sure it left nicely.

I am anxious to see the wick turned up, I think this car is going to do some damage soon!
 

Users who are viewing this thread



Top