difference between 07-09 slave cylinder and 10-14 slave cylinder?

[Venomous94Cobra]

Hey guys im fixing to install a 2012 transmission in my 2008 car and while im at it im going to change the slave cylinder, ive found a great deal on a brand new 2010-2014 slave cylinder but im not sure what the difference is maybe ones longer than the other?

 

[Tob]

With the exception of a different fixed flange configuration and sime minor internal changes, the 2012 TR6060 is very similar to your 2008 TR6060.

Are you installing a different clutch?

 

[Catmonkey]

I believe lenght is the difference. Which one you use is going to be dependent on the clutch, not the transmission.

 

[1320 Junkie]

I believe lenght is the difference. Which one you use is going to be dependent on the clutch, not the transmission.

This...the 07-09 slave throw wise is longer and the 10-14 is shorter due to clutch height...mounts and functiions exactly the same on the 6060 trans.

 

[scotsam]

The difference is the clutch. The later models use the shorter slave and the earlier models use the longer slave. I believe the mcload rxt uses the longer/earlier design. Use either but buy your clutch accordingly.

 

[Catmonkey]

I believe the mcload rxt uses the longer/earlier design. Use either but buy your clutch accordingly.

This depends on what RXT clutch you buy from McLeod. They make RXTs that fit '07-'09 and '10-'14. If you want to use the '07-'09 RXT in a '10-up, you need the earlier throw out bearing.

 

[Venomous94Cobra]

I currently have a mcleod rst clutch in the car now i thought about upgrading the clutch disc to the rxt

 

[Speedboosted]

This depends on what RXT clutch you buy from McLeod. They make RXTs that fit '07-'09 and '10-'14. If you want to use the '07-'09 RXT in a '10-up, you need the earlier throw out bearing.

This is what I did. Works just fine