Driving Lessons Needed?

BIGWHUP03

Member
Established Member
Joined
Nov 2, 2008
Messages
747
Location
Richmond VA
[nomedia="http://www.youtube.com/watch?v=bHkcieZVHAQ"]YouTube - Cobra 11.09 @ 125 In Car Vid[/nomedia]

The whole reason I wanted an in car camera was to see what I was doing wrong. I know I need to keep my hand on the shifter other than that what do yall think?
 
Last edited:

DSGWhippedSnake

Right you are ken
Established Member
Joined
Aug 18, 2008
Messages
4,147
Location
CT
looks like you got it down to me lol looks like you had trouble holding on though :banana:
 

NateV8

Active Member
Established Member
Joined
Apr 26, 2004
Messages
4,236
Location
Pittsburgh, PA
Seemed pretty good to me. Shifts could be a little bit faster but they weren't bad. What are your mods?
 

BIGWHUP03

Member
Established Member
Joined
Nov 2, 2008
Messages
747
Location
Richmond VA
Basic bolt ons Intake and exhaust. 2.76 upper. UNported eaton. SRA. 6 point bar. through the floor subframe connectors. twin disc clutch. eibach drag springs. tubular k member GT brakes all around. N2MB 2-step The kirkey seat put me a little further from the shifter than I'm used to so i had a little more trouble shifting.
 

93_408_LX

New Member
Established Member
Joined
Sep 20, 2008
Messages
1,023
Location
Coquitlam, BC
That was a pretty solid pass, those shifts were solid. I'd say you need a miracle dead-hook pass or ice the intake more! I've seen those cars pick up stupid power from the full ice treatment, although I'm a fan of methanol.
 

rw95gt

Yes, it's stock.
Established Member
Joined
Mar 25, 2007
Messages
1,243
Location
NC
This is me driving my 2011 shelby at a 1/8mile track and at a 1/4 mile track in car. I'm not the best driver but I do power shift. You look to be just as fast as me imo. I would def keep my hand on the shifter the whole pass. It can be distracting reaching for the shifter each shift. You shouldn't need your other hand to steer the car. Keep at it.

[nomedia="http://www.youtube.com/watch?v=TuNZsOhFNlw&feature=autoplay&list=ULXzZjJu-kocI&index=16&playnext=1"]YouTube - 2011 Shelby GT 500[/nomedia]

What mods are done to your cobra?
 

BIGWHUP03

Member
Established Member
Joined
Nov 2, 2008
Messages
747
Location
Richmond VA
This is me driving my 2011 shelby at a 1/8mile track and at a 1/4 mile track in car. I'm not the best driver but I do power shift. You look to be just as fast as me imo. I would def keep my hand on the shifter the whole pass. It can be distracting reaching for the shifter each shift. You shouldn't need your other hand to steer the car. Keep at it.

YouTube - 2011 Shelby GT 500

What mods are done to your cobra?

Mods are posted further up.
 

rw95gt

Yes, it's stock.
Established Member
Joined
Mar 25, 2007
Messages
1,243
Location
NC
Also you can preload the shifter some before you shift I push and pull depending on the gear before I push in the clutch to shift this way you have no delay in the shift. Also what shifter do you have in your cobra?
 

BIGWHUP03

Member
Established Member
Joined
Nov 2, 2008
Messages
747
Location
Richmond VA
looks good, what are you launching at? post your slip numbers

-brandon

Passes for the day:
Pass 1- Pass 2- Pass 3
60'- 1.5346- 1.5527- 1.5945
330- 4.5763- 4.5681- 4.6202
1/8 ET- 7.1573- 7.1068- 7.1822
1/8 MPH- 98.21- 99.14- 98.30
1/4 ET- 11.1693- 11.0961- 11.1873
1/4 MPH- 124.93- 125.21- 124.72

The two step is set to 4000. I don't think I had enough air in the tires. I could feel the wrinkles rolling over themselves.
 
Last edited:

rw95gt

Yes, it's stock.
Established Member
Joined
Mar 25, 2007
Messages
1,243
Location
NC
What size slicks and what air pressure? Stock 3.55 gears? I have had good look with around 12psi with all my cars using a full slicks 28" and 26" any less and it would spin to much.
 

rw95gt

Yes, it's stock.
Established Member
Joined
Mar 25, 2007
Messages
1,243
Location
NC
I think a 28" slick with 4.10s would improve your short times. Maybe drop a .10 in the 60. The larger slick will allow for a heavier launch and swapping to the 4.10s will keep your revs correct at the end of the track. What kind of icing strategies do you use at the track?
 

BIGWHUP03

Member
Established Member
Joined
Nov 2, 2008
Messages
747
Location
Richmond VA
Just circulate ice water through my intercooler. I go through at least one 7lb bag of ice per pass. Saturday wasn't too bad b/c it was only 50 degrees. But i do Ice the shit out of my car.
 

05satinGT

Tire Smoking Specialist
Established Member
Joined
May 11, 2010
Messages
9,177
Location
CT
lol it looks like you almost crapped your self on that run. But everything looked good to me. Shifts were good, your 60' time we great. Just keep trying.
 

BIGWHUP03

Member
Established Member
Joined
Nov 2, 2008
Messages
747
Location
Richmond VA
lol it looks like you almost crapped your self on that run. But everything looked good to me. Shifts were good, your 60' time we great. Just keep trying.

Haha the first run scared me more. I was expecting it to spin but it hooked hard! I was way more prepared for that pass haha.
 

Users who are viewing this thread



Top