F/s: 03/04 built cobra engine

[whitevenum]

'03 4.6L Cobra motor w/forged refreshed internals, stage 2 comp cams, spring, built oil pump and valve covers. Before i built the engine, it had 16k on it. I put about 500 miles on it. Very well maintained, always had royal purple race oil, never abused.ENGINE MUST GO $4000 ( your buying a longblock vavle cover down to oil pan)Im also selling my full s/c cooling set up.The Afco heat exchanger cost 310, pump is 280, hose are about a few hundred bucks, bracket for the heat exchanger is 80, the canton cooler is 190, and s/c intercooler is 900.... Make me an offer on the set up

I'm upgrading to a bigger engine, so I'm selling this one.

Also selling:


built 26 spline T56 for - $1700
fully built Cobra IRS for- $2000
RC Racing 65lb injectors flow matched- $300

[email protected]
-Alex

 

[whitevenum]

bump

 

[Smoothgrandmama]

If you werent way up north we could make something happen. . . . im thinking shipping would be 400+ though :-(

 

[whitevenum]

pmed you bro

 

[supercarkiller]

more info on motor ?

 

[whitevenum]

What do you want to know?

 

[Smoothgrandmama]

What kind of numbers did it make at what boost level?

 

[662rwtq]

so the motor is built what are the internals stock or aftermarket and what kind of boost did you throw at the motor and what kind of numbers did you make.

 

[662rwtq]

does the fiore fuel rails come with it

 

[whitevenum]

Rails dont ... ok useing the 2.6 kb at 19-20 pound on 93 pump gas i made 680whp 580tq and 24pounds on 109 race gas made me 710whp and 670 tq. the internals are stock 03 cobra parts

 

[Extreme281]

Whats been done to the tranny and who did the work ?

 

[whitevenum]

tranny has a 26 spline input shaft and comes with a stage 5 26spline spec clutch.. i did the work im a shop owner

 

[Parts-is-Parts]

Im interested, but I would like for you to post the following:
Why was the engine out for 'refreshening'?
How were stock 03 components 'refreshened'? Specs?
Updated heads? Tick?
Valve Springs?

Thanks, interested! Got a vid of it running by chance?

 

[whitevenum]

I refreshed the engine by changing all the gaskets , seals, pistons , rods when i was puting the cams in. I was not the first owner so i didnt want to take a risk, since the motor was apart i spent the extra time to do it right. Stupid idea to tell you the truth, should have just bought the motor i got now. upgrade are stage 2 comp cam, comp vavle springs, and billet oil pump. Now by selling this im losing stupid amount of money.

Also i am going to be selling the blower intercooler, afco heat exchanger , canton cooler for the blower with all the hoses and the pump, radiator , and longtube headers and prochamber when the engine go's

 

[662rwtq]

whatg do want for the headers what make are they

 

[whitevenum]

I want 400 for them .. but theres a guy who wants both headers and prochamber. There mac ceramic longtubes and mac prochamber

 

[whitevenum]

updated