Feeler: 1998 Supercharged Crystal White Mustang Cobra

b00sted4v

Member
Established Member
Joined
Sep 2, 2008
Messages
659
Location
Boston,MA
Up for sale is my 1998 Cobra I purchased off of this forum back in 2007/2008. Since then I have invested tons of money into it and never seen rain or snow since my ownership. Always garaged and driven on weekends in the summer.

Year: 1998
Make: Ford
Model: Mustang
Price: $15500
Mileage: 75000 (ON BODY)
Color: White
Private or Dealer Listing: Private Listing
Location (State): MA
Transmission: Manual
Drivetrain: Rear Wheel Drive

98 Crystal White Cobra, 75,000 miles on body, 240 miles on all parts, engine, tranny, ect....

-Vortech Si-Trim V1 (only on 5psi right now)
-31x12x3 fmic
-TurboXS RFL BOV
-VMP 75mm MAF tube
-Accufab Single Blade Throttle Body
-Crower stage 3 supercharge cams
-manley .020 over pistons (flat tops)
-crower valve spring with steel retainers
-manley h beam connecting rods with 22mm pin
-manley valves
-ford racing high performance oil pump
-ford racing mustang oil pan
-all new timing chains and gears
-all new gaskets
-all arp hardware thruout engine
-polyurethane motor mounts

-built t-45 tranny (t-45 source)
SureShift Billet 1-2 Shift Fork
SureShift Billet 3-4 Shift Fork
SureShift Billet 1-2 Shift Plate
SureShift Billet 3-4 Shift Plate
Billet 3-4 Synchronizer Inserts
Bronze shift fork pads (1-2, 3-4)
New stock syncrhonizer inserts 1-2, 5-R
New stock syncrhonizer springs
New stock shift fork pads (5-R)
New seals
Clutch fork pivot ball stud
Carbon fiber lined synchronizer rings
New Bearings

-255lph pump
-#62 injectors
-Brand new stock Coil Packs
-MSD 9MM Performance Wires
-JMS Ignition booster
-new Genuine Ford Black leather steering wheel
-Eaton POSI with ford racing 373 gears
-31 Spline Mosers
-UPR Adjustable Upper Control Arms
-UPR Lowers (Non-Adj.)
-H&R 1000lbs race springs
-KYB AGX 5 way adjustable front socks
-KYB GR-2 rear shocks
-Maximum Motorsports Full Length Welded Sub Frame Connectors
-spec stage 2+ clutch kit
-Pro 5.0 Short Throw
-custom dyno tune
-brand new sct handheld
-Bassani X-pipe no cats
-bassani mid-length headers
-Bassani Catback
-UPR Caster/Camber Plates
-Autometer Boost Gauge
-Autometer Air Fuel Gauge
-Black Dual Pillar Mount
-Blue Oval Industries Seat Rail Extenders
-Kaenen Saleen S281 spoiler
-MGW Cobra Knob (chrome)
-MGW HVAC knobs (chrome)
-Baer Slotted and Drilled Rotors
-Black 14" antenna
-HID Kit (6k)
-New light-smoked headlights
-Mustang Aluminum Coolant Expansion Tank
-IMRC Deletes just ordered from MMR (not yet installed)

Have all receipts for parts, build

Clean title and in hand, $15,500 on saleen reps or 03 cobra reps with brand new tires

URL=https://imageshack.com/i/mrrqt3j]
rqt3.jpg
[/URL]







 
Last edited:

b00sted4v

Member
Established Member
Joined
Sep 2, 2008
Messages
659
Location
Boston,MA
Waiting on final tune now, if any serious interested will get tuned asap. Only reason for sale is to get R33 GTR.

With just s-trim (5psi) and bassani x-pipe with cats the car went 12.8 @ 117 back in 2008 on bfg kdw's
 

b00sted4v

Member
Established Member
Joined
Sep 2, 2008
Messages
659
Location
Boston,MA
Has the odometer gear ever broken or been replaced ? Any issues with blower alignment and belts ?

Odometer gear replaced? Not while I have owned it. Bought this car off this forum in 2007-2008 and have put 5-10k miles on it if that. 3-4 months after owning the cams froze up and thats when decide to build the car with everything listed in the ad. No issus with the blower alignment or belts at all.
 

b00sted4v

Member
Established Member
Joined
Sep 2, 2008
Messages
659
Location
Boston,MA
Did you get it tuned yet? Dyno numbers?

Waiting to be tuned now, I brought it last summer to dyno bunch of times and wasn't making the power it should have. timing was off a tooth and have yet to been back. I will be getting it tuned here very soon once the weather breaks.
 

b00sted4v

Member
Established Member
Joined
Sep 2, 2008
Messages
659
Location
Boston,MA
Has the odometer gear ever broken or been replaced ? Any issues with blower alignment and belts ?

speedometer and odometer have always worked in this car. The car sat for about 3-4 years when the cams froze up after buying it. I then pulled engine, tranny ect... and started ordering parts over the years while it sat in my garage. Like mentioned under 500 miles on all parts I installed.
 

Users who are viewing this thread



Top