For Sale: Polished Kenne Bell 2.2

[Quicktime_GT]

For Sale: Polished Kenne Bell 2.2

Hello,

I have a Gen 1 Kenne Bell 2.2 for sale.

I originally purchased this blower in November of 2010 from a semi-local guy. His for sale ad was on svtperformance.com, here:

http://www.svtperformance.com/forums/showthread.php?734018-Kb-2-2-for-sale

Since owning the blower, I have put 3-4000 mile on it. The majority of the time it has been pullied with a 3.0” / 2lb combo, and occasionally pullied with a 2.75” / lb combo. I am the third owner and the previous owner stated within this for sale ad that the blower had less than 15,000 miles on it.

The blower was filled with fresh Kenne Bell oil when installed in 2010 and has been changed once again since then within the 3-4000 miles of use.

On my car, it made 575rwhp at 17psi, and made 621rwhp at 20psi on 110.

The catch can is some-what of a unique square design and I believe this was offered by Horsepower by Herman long ago. There is really no benefit of this, and to be honest I had planned to eventually swap the snout to a gen 2 design.

Due to a recent head gasket failure, I am in process of building the engine in the car and am looking at going to a larger blower. I’ll eventually be running a built engine on e85 and will likely look for a 2.9 or 3.4 Whipple. This 2.2 has performed amazingly and has done it’s part flawlessly. As with all KB2.2’s, this blower has sounds amazing and the whine is extremely loud!

I’m asking $2500 for the blower, a Kenne Bell SBTB a 3.0 and 2.75” pulley along with the KB pulley removal tool. Price is firm for now, but would separate blower, pulleys, etc. Will come with a fresh shine to go with the whine!

Key Points:
• Gen 1 polished KB 2.2
• Price: $2500 w/ KB SBTB, 2.75” and 3.0” pulley along with removal tool.
• Mileage: believed to be 18-19,000 based upon previous for sale ad combined with total mileage since my ownership.
• Located in Columbia, KY (42728)
• Will accept payment via paypal +fees or cash in person.
• Will ship with buyer paying shipping expense.
• Would trade + cash to a Whipple 2.9, 3.4 or Kenne Bell 2.8.

***Blower will be sold "dry" with no oil - Buyer will have to buy / add oil to blower.

Please Feel free to contact me via:
• Direct PM
• Email: [email protected]
• Phone: 270-4nine3-00one0

Thanks for the interest,
Neil Goodin

Supporting photos and videos below:

Top:

LH Side

LH Side Snout:

RH Side :

RH Side snout :

Front:

Back:

Bottom Side:

Rotors:

Serial:

Inlet:

Catch Can:
[/URL



Underhood:




Assembled:




VIDEOS:

Vs. C6ZO6
[url]http://youtu.be/R_kb6Vj1IWo

Vs. GTR

http://youtu.be/d_wdFwTSawU

Dyno Video:
https://www.youtube.com/watch?v=-NSEOuc5-VQ&list=UUD63sL05A8aFWHI_mREtu1A

 

[TERMINATED97]

GLWS! This thread should be stickied on how to post a for sale thread.

 

[Quicktime_GT]

GLWS! This thread should be stickied on how to post a for sale thread.

Thank You, Sir..

 

[FastyJohn03]

Question of topic when u races that z06 was it on 17 or 20psi?

 

[1Kona_Venom]

GLWS! This thread should be stickied on how to post a for sale thread.

Was thinking the very same thing lol

 

[Zemedici]

if only it wasnt polished! GLWS :beer: Nice looking unit bud and car moves out.

 

[Quicktime_GT]

Question of topic when u races that z06 was it on 17 or 20psi?

Was thinking the very same thing lol

Lol.. Both races were on the 17psi 575 tune.

Thanks for the free bump

 

[Quicktime_GT]

Additional Photos added to the original post

Thanks,
Neil

 

[Postal Pimp]

Pm sent

 

[Quicktime_GT]

Replies sent to all PM's.


Thanks for the offers, folks. Unfortunately, I've got to stay firm at $2500 for now. This blower is very clean and has received a ton of interest. A KB2.2 has a sound like no other which really makes them a bit unique. If not wanting to significantly upgrade, I would be keeping this one for sure.

Thanks for all the interest,
Neil

 

[blackedout06]

God that thing shines up nice! I wish I had the extra money to afford it right now! GLWS

 

[Quicktime_GT]

Additional photos of KB throttle body included at $2500. To me, this appears to be an Accufab unit sourced and branded by KB.

(TB has not yet been cleaned up / polished, but would be prior to packaging.)

 

[Quicktime_GT]

Additional photos of "base plate." This thing is going to look great and make someone a nice clean setup!

TOP

(blue tape simply protecting blower to plate gasket)

BOTTOM

 

[Quicktime_GT]

SALE PENDING TO subobo0411

 

[Quicktime_GT]

Potential buyer backed out. Blower back up for sale.

Neil

 

[Quicktime_GT]

Bump

 

[bauto]

pm sent

 

[subobo0411]

Bump for an honest and open seller! Really nice guy to deal with and someone's going to be lucky to purchase this! Wish it was me, but it's just not the right time. Nothing beats the sounds of a KB 2.2 :bowdown:

 

[JHC95]

Pm'd

 

[cozmo2806]

How has this not sold?